관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
표준
판매
Fuel cell technologies - Part 4-102: Fuel cell power systems for electrically powered industrial trucks - Performance test methods
| 분야 | TC 105 : Fuel cell technologies |
|---|---|
| 적용범위 | IEC 62282-4-102:2022 specifies the performance test methods of fuel cell power systems for propulsion and auxiliary power units (APU). This document covers fuel cell power systems for propulsion other than those for road vehicles. This document applies to gaseous hydrogen-fuelled fuel cell power systems and direct methanol fuel cell power systems for electrically powered industrial trucks. The following fuels are considered within the scope of this document: - gaseous hydrogen, and - methanol. This document covers the fuel cell power system as defined in 3.7 and Figure 1. This document applies to DC type fuel cell power systems, with a rated output voltage not exceeding DC 150 V for indoor and outdoor use. This document covers fuel cell power systems whose fuel source container is permanently attached to either the industrial truck or the fuel cell power system. This second edition cancels and replaces the first edition published in 2017. This edition includes the following significant technical changes with respect to the previous edition: a. alignment of the Scope with the second edition of IEC 62282-4-101:2022; b. deletion of terms and definitions (previous entries 3.5, 3.10, and 3.15); c. addition of new terms in Clause 3: "delivered power" (3.13) and "regenerated power" (3.14); d. revision of symbols and their meanings in alignment with those of IEC 62282-3-201; e. replacement of "reference conditions" with "standard conditions" as seen in Clause 5; f. revision of the test method for the accessory load voltage spike test (13.3.2); g. addition of clarifications in Clause 14 (Power stability under operation); h. addition of a checklist for performance criteria dealt with in this document (Annex C). |
| 국제분류(ICS)코드 | 27.070 : 연료 전지 |
| 페이지수 | 76 |
| Edition | 2.0 |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | IEC 62282-4-102:2022 | Fuel cell technologies - Part 4-102: Fuel cell power systems for electrically powered industrial trucks - Performance test methods | 2022-12-20 | 표준 |
| 2 | IEC 62282-4-102:2022 RLV | Fuel cell technologies - Part 4-102: Fuel cell power systems for electrically powered industrial trucks - Performance test methods | 2022-12-20 | 표준 |
| 3 | IEC 62282-4-102:2017 | Fuel cell technologies - Part 4-102: Fuel cell power systems for industrial electric trucks - Performance test methods | 2017-04-10 | 구판 |
IEC PAS 62282-6-1:2006 - Fuel cell technologies - Part 6-1: Micro fuel cell power systems - Safety 상세보기
IEC 62282-3-2:2006 - Fuel cell technologies - Part 3-2: Stationary fuel cell power systems - Performance test methods 상세보기
IEC PAS 62282-6-1:2006/COR1:2007 - Corrigendum 1 - Fuel cell technologies - Part 6-1: Micro fuel cell power systems - Safety 상세보기
IEC 62282-3-1:2007 - Fuel cell technologies - Part 3-1: Stationary fuel cell power systems - Safety 상세보기
IEC 62282-3-3:2007 - Fuel cell technologies - Part 3-3: Stationary fuel cell power systems - Installation 상세보기
IEC 62282-4-600:2022 - Fuel cell technologies - Part 4-600: Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU) - Fuel cell/battery hybrid systems performance test methods for excavators 상세보기
ASTM E756-05(2017) - Standard Test Method for Measuring Vibration-Damping Properties of Materials 상세보기
ASTM D790-17 - Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials 상세보기
UIC 721 - RECOMMENDATIONS FOR THE USE OF RAIL STEEL GRADES 상세보기
AWS D1.1/D1.1M 24th Edition, 2020 - Structural Welding Code—Steel 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
