관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
표준
판매
Electric vehicle wireless power transfer (WPT) systems - Part 3: Specific requirements for magnetic field wireless power transfer systems
| 분야 | TC 69 : Electrical power/energy transfer systems for electrically propelled road vehicles and industrial trucks |
|---|---|
| 적용범위 | IEC 61980-3:2022 applies to the off-board supply equipment for wireless power transfer via magnetic field (MF-WPT) to electric road vehicles for purposes of supplying electric energy to the RESS (rechargeable energy storage system) and/or other on-board electrical systems. The MF-WPT system operates at standard supply voltage ratings per IEC 60038 up to 1 000 V AC and up to 1 500 V DC from the supply network. The power transfer takes place while the electric vehicle (EV) is stationary. Off-board supply equipment fulfilling the requirements in this document are intended to operate with EV devices fulfilling the requirements described in ISO 19363. The aspects covered in this document include – the characteristics and operating conditions, – the required level of electrical safety, – requirements for basic communication for safety and process matters if required by a MF WPT system, – requirements for positioning to assure efficient and safe MF-WPT power transfer, and – specific EMC requirements for MF-WPT systems. The following aspects are under consideration for future documents: – requirements for MF-WPT systems for two- and three-wheel vehicles, – requirements for MF-WPT systems supplying power to EVs in motion, – requirements for bidirectional power transfer, – requirements for flush mounted primary device, – requirements for MF-WPT systems for heavy duty vehicle, and – requirements for MF-WPT systems with inputs greater than 11,1 kVA. This document does not apply to – safety aspects related to maintenance, and – trolley buses, rail vehicles and vehicles designed primarily for use off-road. IEC 61980-3:2022 is to be used in conjunction with IEC 61980-1:2020. |
| 국제분류(ICS)코드 | 43.120 : 전기차 및 부분품 |
| 페이지수 | 239 |
| Edition | 1.0 |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | IEC 61980-3:2022 | Electric vehicle wireless power transfer (WPT) systems - Part 3: Specific requirements for magnetic field wireless power transfer systems | 2022-11-23 | 표준 |
| 2 | IEC TS 61980-3:2019 | Electric vehicle wireless power transfer (WPT) systems - Part 3: Specific requirements for the magnetic field wireless power transfer systems | 2019-06-13 | 폐지(대체) |
IEC TS 61980-3:2019 - Electric vehicle wireless power transfer (WPT) systems - Part 3: Specific requirements for the magnetic field wireless power transfer systems 상세보기
IEC TS 61980-2:2019 - Electric vehicle wireless power transfer (WPT) systems - Part 2: Specific requirements for communication between electric road vehicle (EV) and infrastructure 상세보기
IEC 61980-1:2020 - Electric vehicle wireless power transfer (WPT) systems - Part 1: General requirements 상세보기
IEC 61980-2:2023 - Electric vehicle wireless power transfer (WPT) systems - Part 2: Specific requirements for MF-WPT system communication and activities 상세보기
IEC 61980-1:2020 - Electric vehicle wireless power transfer (WPT) systems - Part 1: General requirements 상세보기
IEC 61980-2:2023 - Electric vehicle wireless power transfer (WPT) systems - Part 2: Specific requirements for MF-WPT system communication and activities 상세보기
IEC 62955:2018 - Residual direct current detecting device (RDC-DD) to be used for mode 3 charging of electric vehicles 상세보기
IEC 61851-21-1:2017 - Electric vehicle conductive charging system - Part 21-1 Electric vehicle on-board charger EMC requirements for conductive connection to AC/DC supply 상세보기
IEC 62196-3:2022 - Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 3: Dimensional compatibility requirements for DC and AC/DC pin and contact-tube vehicle couplers 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
