관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
표준
판매
Explosive atmospheres - Part 5: Equipment protection by powder filling "q"
| 분야 | TC 31 : Equipment for explosive atmospheres |
|---|---|
| 적용범위 | IEC 60079-5:2015+AMD1:2022 CSV contains specific requirements for the construction, testing and marking of electrical equipment, parts of electrical equipment and Ex components in the type of protection powder filling "q", intended for use in explosive gas atmospheres. This standard supplements and modifies the general requirements of IEC 60079-0. Where a requirement of this standard conflicts with a requirement of IEC 60079-0, the requirement of this standard takes precedence. This standard applies to electrical equipment, parts of electrical equipment and Ex components with: - a rated supply current less than or equal to 16 A; - a rated supply voltage less than or equal to 1 000 V; - a rated power consumption less than or equal to 1 000 W. This fourth edition cancels and replaces the third edition, published in 2007, and constitutes a technical revision. Refer to the Foreword of the document for a complete listing of the technical changes between edition 4.0 and previous edition of the document. Keywords: electrical equipment and Ex components in the type of protection powder filling "q" |
| 국제분류(ICS)코드 | 29.260.20 : 폭발 환경용 전기장치 |
| 페이지수 | 83 |
| Edition | 4.1 |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | IEC 60079-5:2015/AMD1:2022 | Amendment 1 - Explosive atmospheres - Part 5: Equipment protection by powder filling "q" | 2022-05-12 | 표준 |
| 2 | IEC 60079-5:2015+AMD1:2022 CSV | Explosive atmospheres - Part 5: Equipment protection by powder filling "q" | 2022-05-12 | 표준 |
| 3 | IEC 60079-5:2015 RLV | Explosive atmospheres - Part 5: Equipment protection by powder filling "q" | 2015-02-17 | 표준 |
| 4 | IEC 60079-5:2015 | Explosive atmospheres - Part 5: Equipment protection by powder filling "q" | 2015-02-17 | 표준 |
| 5 | IEC 60079-5:2007 | Explosive atmospheres - Part 5: Equipment protection by powder filling "q" | 2007-03-29 | 구판 |
| 6 | IEC 60079-5:1997/AMD1:2003 | Amendment 1 - Electrical apparatus for explosive gas atmospheres - Part 5: Powder filling "q" | 2003-09-29 | 구판 |
| 7 | IEC 60079-5:1997 | Electrical apparatus for explosive gas atmospheres - Part 5: Powder filling "q" | 1997-04-10 | 구판 |
| 8 | IEC 60079-5:1967 CSV | Electrical apparatus for explosive gas atmospheres - Part 5: Sand-filled apparatus | 1969-01-01 | 구판 |
| 9 | IEC 60079-5:1967 | Electrical apparatus for explosive gas atmospheres. Part 5: Sand-filled apparatus | 1967-01-01 | 구판 |
IEC 60079-8:1969 - Electrical apparatus for explosive gas atmospheres - Part 8: Classification of maximum surface temperatures 상세보기
IEC 60079-4A:1970 - Electrical apparatus for explosive gas atmospheres - Part 4: Method of test for ignition temperature - First supplement. *Note.-This supplement applies also to the second edition of 1975 상세보기
IEC 60079-9:1970 - Electrical apparatus for explosive gas atmospheres - Part 9: Marking 상세보기
IEC 60079-8:1969/AMD1:1972 - Amendment 1 - Electrical apparatus for explosive gas atmospheres - Part 8: Classification of maximum surface temperatures 상세보기
IEC 60079-4:1975 - Electrical apparatus for explosive gas atmospheres. Part 4: Method of test for ignition temperature 상세보기
IEC 60079-7:2015+AMD1:2017 CSV - Explosive atmospheres - Part 7: Equipment protection by increased safety "e" 상세보기
IEC 60079-6:2015+AMD1:2020 CSV - Explosive atmospheres - Part 6: Equipment protection by liquid immersion "o" 상세보기
IEC 60079-14:2013 - Explosive atmospheres - Part 14: Electrical installations design, selection and erection 상세보기
IEC 60079-18:2014+AMD1:2017 CSV - Explosive atmospheres - Part 18: Equipment protection by encapsulation "m" 상세보기
IEC 60079-15:2017 - Explosive atmospheres - Part 15: Equipment protection by type of protection "n" 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
