관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
표준
판매
Fuel cell technologies - Part 4-101: Fuel cell power systems for electrically powered industrial trucks - Safety
| 분야 | TC 105 : Fuel cell technologies |
|---|---|
| 적용범위 | IEC 62282-4-101:2022 deals with safety of fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU). This part of IEC 62282 covers safety requirements for fuel cell power systems intended to be used in electrically powered industrial trucks as defined in ISO 5053-1.except for: rough-terrain trucks; non-stacking low-lift straddle carriers; stacking high-lift straddle carriers; rough-terrain variable-reach trucks; slewing rough-terrain variable-reach trucks; variable-reach container handlers; pedestrian propelled trucks. This document applies to gaseous hydrogen-fueled fuel cell power systems and direct methanol fuel cell power systems for electrically powered industrial trucks. This document applies to DC type fuel cell power systems, with a rated output voltage not exceeding 150 V DC for indoor and outdoor use.This second edition cancels and replaces the first edition published in 2014.This edition includes the following significant technical changes with respect to the previous edition: - revision of the title of this document; - revision of reference standards; - addition of new subclauses (4.3, 4.14.5, 4.15.3, 4.15.4, 4.16, 5.6, and 5.23); - previous 4.15 was revised as “4.16 Risk assessment and risk reduction”; - revision of 4.6 3), access to the manual shutoff valve; - revision of requirements for battery terminals that are threaded (4.14.10.1); - revision of requirements for double layer capacitors (4.14.10.2); - revision of external leakage test (5.5) and ultimate strength test (5.7); - revision of temperature limits on capacitors depending on the temperature rating of the material (Table 3); - revision of markings that are not relevant (Clause 7); - added “Significant hazards, hazardous situations and events dealt with in this document” as a new informative annex |
| 국제분류(ICS)코드 | 27.070 : 연료 전지 |
| 페이지수 | 104 |
| Edition | 2.0 |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | IEC 62282-4-101:2022 | Fuel cell technologies - Part 4-101: Fuel cell power systems for electrically powered industrial trucks - Safety | 2022-08-11 | 표준 |
| 2 | IEC 62282-4-101:2022 RLV | Fuel cell technologies - Part 4-101: Fuel cell power systems for electrically powered industrial trucks - Safety | 2022-08-11 | 표준 |
| 3 | IEC 62282-4-101:2014 | Fuel cell technologies - Part 4-101: Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU) - Safety of electrically powered industrial trucks | 2014-08-12 | 구판 |
IEC PAS 62282-6-1:2006 - Fuel cell technologies - Part 6-1: Micro fuel cell power systems - Safety 상세보기
IEC 62282-3-2:2006 - Fuel cell technologies - Part 3-2: Stationary fuel cell power systems - Performance test methods 상세보기
IEC PAS 62282-6-1:2006/COR1:2007 - Corrigendum 1 - Fuel cell technologies - Part 6-1: Micro fuel cell power systems - Safety 상세보기
IEC 62282-3-1:2007 - Fuel cell technologies - Part 3-1: Stationary fuel cell power systems - Safety 상세보기
IEC 62282-3-3:2007 - Fuel cell technologies - Part 3-3: Stationary fuel cell power systems - Installation 상세보기
IEC 62282-6-200:2016 - Fuel cell technologies - Part 6-200: Micro fuel cell power systems - Performance test methods 상세보기
IEC 62282-4-102:2017 - Fuel cell technologies - Part 4-102: Fuel cell power systems for industrial electric trucks - Performance test methods 상세보기
IEC 62282-3-100:2019 - Fuel cell technologies - Part 3-100: Stationary fuel cell power systems - Safety 상세보기
IEC 62282-2-100:2020 - Fuel cell technologies - Part 2-100: Fuel cell modules - Safety 상세보기
KS C IEC 62282-4-101(2021 확인) - 연료전지 기술 — 제4-101부: 도로 주행용 차량과 보조 전원 장치(APU) 이외의 추진용 연료전지 발전 시스템 — 산업용 전동 트럭의 안전 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
