관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
표준
판매
Rotating electrical machines - Dimensions and output series - Part 1: Frame numbers 56 to 400 and flange numbers 55 to 1080
| 분야 | TC 2 : Rotating machinery |
|---|---|
| 적용범위 | IEC 60072-1:2022 is applicable for the majority of rotating electrical machines for industrial purposes within the dimension range and output powers. - Foot- mounted: shaft heights: 56 mm to 400 mm - Flange- mounted: pitch circle diameter of flange: 55 mm to 1 080 mm. This seventh edition cancels and replaces the sixth edition published in 1991. This edition includes the following significant technical changes with respect to the previous edition: a. modification of the series title; b. complete revision on the basis of EN 50347; c. integration of the relationships between frame size, shaft extensions, rated outputs and flange numbers; d. additional tolerances and measurements for shafts; e. modification of Annex A with additional frame numbers and relationships between frame size and rated power. |
| 국제분류(ICS)코드 | 29.160.01 : 회전기계 일반 |
| 페이지수 | 53 |
| Edition | 7.0 |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | IEC 60072-1:2022 | Rotating electrical machines - Dimensions and output series - Part 1: Frame numbers 56 to 400 and flange numbers 55 to 1080 | 2022-03-30 | 표준 |
| 2 | IEC 60072-1:1991 | Dimensions and output series for rotating electrical machines - Part 1: Frame numbers 56 to 400 and flange numbers 55 to 1080 | 1991-02-01 | 구판 |
| 3 | IEC 60072-1:1967 | Dimensions and output ratings of electrical machines - Part 1: Foot-mounted electrical machines with shaft heights between 56 and 315 mm (2 ⅝ and 12 ½ in) | 1967-01-01 | 구판 |
IEC 60072-2:1990 - Dimensions and output series for rotating electrical machines - Part 2: Frame numbers 355 to 1000 and flange numbers 1180 to 2360 상세보기
IEC 60072-3:1994 - Dimensions and output series for rotating electrical machines - Part 3: Small built-in motors - Flange numbers BF10 to BF50 상세보기
ASTM A490M-14a - Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints (Metric) (Withdrawn 2016) 상세보기
ASTM C411-19 - Standard Test Method for Hot-Surface Performance of High-Temperature Thermal Insulation 상세보기
ASTM A106/A106M-19a - Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service 상세보기
ASTM A307-21 - Standard Specification for Carbon Steel Bolts, Studs, and Threaded Rod 60?000 PSI Tensile Strength 상세보기
ASME B1.2-1983(R2017) - Gages and Gaging for Unified Inch Screw Threads (B1.2 - 1983) 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
