관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
표준
판매
Rotating electrical machines - Part 9: Noise limits
| 분야 | TC 2 : Rotating machinery |
|---|---|
| 적용범위 | IEC 60034-9:2021 specifies test methods for the determination of sound power level of rotating electrical machines and specifies maximum A-weighted sound power levels for factory acceptance testing of network-supplied, rotating electrical machines in accordance with lEC 60034-1, having methods of cooling according to lEC 60034-6 and degrees of protection according to lEC 60034-5, and having the following characteristics: - standard design, either AC or DC, without additional special electrical, mechanical, or acoustical modifications intended to reduce the sound power level - rated output from 1 kW (or kVA) up to and including 5 500 kW (or kVA) - rated speed not greater than 3 750 min–1 This fifth edition cancels and replaces the fourth edition, published in 2003 and its amendment 1, published in 2007. This edition includes the following significant technical changes with respect to the previous edition: a) In Table 2 and Table 3 cooling methods IC01, IC11, IC21 and IC31, IC71, IC81 are now covered. b) This edition adds Table 3 for 60 Hz machines, whereas Table 2, which covers only 50 Hz machines, has no change in levels. c) In Table 3, grade A is added to harmonize the highest levels seen in IEC and NEMA, whereas grade B was added to harmonize the lowest, more restrictive levels seen in IEC and NEMA. d) The clause “Determination of noise increments caused by converter supply” has been shifted to Annex B and renamed “Information on typical noise increments caused by converter supply”. |
| 국제분류(ICS)코드 | 29.160.01 : 회전기계 일반 |
| 페이지수 | 40 |
| Edition | 5.0 |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | IEC 60034-9:2021 | Rotating electrical machines - Part 9: Noise limits | 2021-10-14 | 표준 |
| 2 | IEC 60034-9:2021 CMV | Rotating electrical machines - Part 9: Noise limits | 2021-10-14 | 표준 |
| 3 | IEC 60034-9:2003+AMD1:2007 CSV | Rotating electrical machines - Part 9: Noise limits | 2007-07-25 | 구판 |
| 4 | IEC 60034-9:2003/AMD1:2007 | Amendment 1 - Rotating electrical machines - Part 9: Noise limits | 2007-03-07 | 구판 |
| 5 | IEC 60034-9:2003 | Rotating electrical machines - Part 9: Noise limits | 2003-10-10 | 구판 |
| 6 | IEC 60034-9:1997 | Rotating electrical machines - Part 9: Noise limits | 1997-07-30 | 구판 |
| 7 | IEC 60034-9:1990/AMD1:1995 | Amendment 1 - Rotating electrical machines. Part 9: Noise limits. | 1995-03-31 | 구판 |
| 8 | IEC 60034-9:1990/COR1:1991 | Corrigendum 1 - Rotating electrical machines. Part 9: Noise limits | 1991-01-01 | 구판 |
| 9 | IEC 60034-9:1990 | Rotating electrical machines. Part 9: Noise limits. | 1990-05-31 | 구판 |
| 10 | IEC 60034-9:1972 | Rotating electrical machines - Part 9: Noise limits | 1972-01-01 | 구판 |
| 11 | IEC 60034-9:1972/COR1:1972 | Corrigendum 1 - Rotating electrical machines - Part 9: Noise limits | 1972-01-01 | 구판 |
IEC 60034-2:1972 - Rotating electrical machines. Part 2: Methods for determining losses and efficiency of rotating electrical machinery from tests (excluding machines for traction vehicles) 상세보기
IEC 60034-2A:1974 - Rotating electrical machines - Part 2: Methods for determining losses and efficiency of rotating electrical machinery form tests (excluding machines for traction vehicles) - Measurement of losses by the calorimetric method 상세보기
IEC 60034-10:1975 - Rotating electrical machines. Part 10: Conventions for description of synchronous machines 상세보기
IEC 60034-13:1980 - Rotating electrical machines. Part 13: Specification for mill auxiliary motors 상세보기
IEC 60034-11-2:1984 - Rotating electrical machines - Part 11: Built-in thermal protection - Chapter 2: Thermal detectors and control units used in thermal protection systems 상세보기
IEC 60034-6:1991 - Rotating electrical machines - Part 6: Methods of cooling (IC Code) 상세보기
IEC 60034-26:2006 - Rotating electrical machines - Part 26: Effects of unbalanced voltages on the performance of three-phase cage induction motors 상세보기
IEC 60034-7:2020 - Rotating electrical machines - Part 7: Classification of types of construction, mounting arrangements and terminal box position (IM Code) 상세보기
IEC 60034-1:2022 - Rotating electrical machines - Part 1: Rating and performance 상세보기
IEC TS 60034-16-3:1996 - Rotating electrical machines - Part 16: Excitation systems for synchronous machines - Section 3: Dynamic performance 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
