관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
표준
판매
Determination of certain substances in electrotechnical products - Part 2: Disassembly, disjointment and mechanical sample preparation
| 분야 | TC 111 : Environmental standardization for electrical and electronic products and systems |
|---|---|
| 적용범위 | IEC 62321-2:2021 provides strategies of sampling along with the mechanical preparation of samples from electrotechnical products. These samples can be used for analytical testing to determine the levels of certain substances as described in the test methods in other parts of the IEC 62321 series. Restrictions for substances will vary between geographic regions and can be updated on a regular basis. This document describes a generic process for obtaining and preparing samples prior to the determination of any substance of concern. This document does not provide: – full guidance on each and every product that could be classified as electrotechnical product. Since there is a huge variety of electrotechnical parts, with various structures and compositions, along with the continuous innovations in the industry, it is unrealistic to attempt to provide procedures for the disjointment of every type of part; – guidance regarding other routes to gather additional information on certain substances in a product, although the information collected has relevance to the sampling strategies in this document; – safe disassembly and mechanical disjointment instructions related to electrotechnical products (e.g. mercury-containing switches) and the recycling industry (e.g. how to handle CRTs or the safe removal of batteries). See IEC 62554 for the disjointment and mechanical sample preparation of mercury-containing fluorescent lamps; – sampling procedures for packaging and packaging materials; – analytical procedures to measure the levels of certain substances. This is covered by other standards (e.g. other parts of the IEC 62321 series), which are referred to as ;test standards; in this document; – guidelines for assessment of compliance. This document has the status of a horizontal standard in accordance with IEC Guide 108. IEC 62321-2:2021 cancels and replaces the first edition published in 2013. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) Reference to the IEC 62321 series instead of to a list of individual parts of the IEC 62321 series. b) Update of the flow chart in Figure 1. Restructure of Clause 4 and update of examples in Annex A. c) Adjustment of the risk levels of certain parts and materials to reflect the recent technology development and material change. Update of Table B.1 to include the risk levels of phthalates. Creation of Table B.2 for other substances (e.g. HBCDD, PAH) in polymeric materials. |
| 국제분류(ICS)코드 |
43.040.10 : 전기장비
13.020.01 : 환경 및 환경 보호 일반 |
| 페이지수 | 105 |
| Edition | 2.0 |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | IEC 62321-2:2021 | Determination of certain substances in electrotechnical products - Part 2: Disassembly, disjointment and mechanical sample preparation | 2021-08-30 | 표준 |
| 2 | IEC 62321-2:2013 | Determination of certain substances in electrotechnical products - Part 2: Disassembly, disjointment and mechanical sample preparation | 2013-06-25 | 구판 |
IEC 62321-1:2013 - Determination of certain substances in electrotechnical products - Part 1: Introduction and overview 상세보기
IEC 62321-4:2013 - Determination of certain substances in electrotechnical products - Part 4: Mercury in polymers, metals and electronics by CV-AAS, CV-AFS, ICP-OES and ICP-MS 상세보기
IEC 62321-3-1:2013 - Determination of certain substances in electrotechnical products - Part 3-1: Screening - Lead, mercury, cadmium, total chromium and total bromine by X-ray fluorescence spectrometry 상세보기
IEC 62321-5:2013 - Determination of certain substances in electrotechnical products - Part 5: Cadmium, lead and chromium in polymers and electronics and cadmium and lead in metals by AAS, AFS, ICP-OES and ICP-MS 상세보기
IEC 62321-6:2015 - Determination of certain substances in electrotechnical products - Part 6: Polybrominated biphenyls and polybrominated diphenyl ethers in polymers by gas chromatograhy -mass spectometry (GC-MS) 상세보기
IEC 62321-4:2013+AMD1:2017 CSV - Determination of certain substances in electrotechnical products - Part 4: Mercury in polymers, metals and electronics by CV-AAS, CV-AFS, ICP-OES and ICP-MS 상세보기
IEC 62321-1:2013 - Determination of certain substances in electrotechnical products - Part 1: Introduction and overview 상세보기
IEC 62321-5:2013 - Determination of certain substances in electrotechnical products - Part 5: Cadmium, lead and chromium in polymers and electronics and cadmium and lead in metals by AAS, AFS, ICP-OES and ICP-MS 상세보기
IEC 62321-3-2:2020 - Determination of certain substances in electrotechnical products - Part 3-2: Screening - Fluorine, bromine and chlorine in polymer and electronics by combustion-ion chromatography (C-IC) 상세보기
IEC 62321-9:2021 - Determination of certain substances in electrotechnical products - Part 9: Hexabromocyclododecane in polymers by gas chromatography-mass spectrometry (GC-MS) 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
