관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
표준
판매
Surge arresters - Part 5: Selection and application recommendations
| 분야 | TC 37 : Surge arresters |
|---|---|
| 적용범위 | IEC 60099-5:2018 provides information, guidance, and recommendations for the selection and application of surge arresters to be used in three-phase systems with nominal voltages above 1 kV. It applies to gapless metal-oxide surge arresters as defined in IEC 60099-4, to surge arresters containing both series and parallel gapped structure – rated 52 kV and less as defined in IEC 60099-6 and metal-oxide surge arresters with external series gap for overhead transmission and distribution lines (EGLA) as defined in IEC 60099-8. In Annex J, some aspects regarding the old type of SiC gapped arresters are discussed. Surge arrester residual voltage is a major parameter to which most users have paid a lot of attention to when selecting the type and rating. Typical maximum residual voltages are given in Annex F. It is likely, however, that for some systems, or in some countries, the requirements on system reliability and design are sufficiently uniform, so that the recommendations of the present standard may lead to the definition of narrow ranges of arresters. The user of surge arresters will, in that case, not be required to apply the whole process introduced here to any new installation and the selection of characteristics resulting from prior practice may be continued. Annexes H and I present comparisons and calculations between old line discharge classification and new charge classification. This third edition cancels and replaces the second edition published in 2013. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition regarding the new surge arrester classification introduced in IEC 60099-4:2014: a) Expanded discussion of comparison between the old and new classification and how to calculate or estimate the corresponding charge for different stresses. b) New annexes dealing with: - Comparison between line discharge classes and charge classification - Estimation of arrester cumulative charges and energies during line switching Keywords: selection and application of surge arrestors, nominal voltages above 1 kV |
| 국제분류(ICS)코드 |
29.240.10 : 변전소. 서어지 방지장치
29.120.50 : 휴즈 및 기타 과전류 방지 장치 |
| 페이지수 | 417 |
| Edition | 3.0 |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | IEC 60099-5:2018 RLV | Surge arresters - Part 5: Selection and application recommendations | 2018-01-19 | 표준 |
| 2 | IEC 60099-5:2018 | Surge arresters - Part 5: Selection and application recommendations | 2018-01-19 | 표준 |
| 3 | IEC 60099-5:2013 | Surge arresters - Part 5: Selection and application recommendations | 2013-05-22 | 구판 |
| 4 | IEC 60099-5:1996+AMD1:1999 CSV | Surge arresters - Part 5: Selection and application recommendations | 2000-03-30 | 구판 |
| 5 | IEC 60099-5:1996/AMD1:1999 | Amendment 1 - Surge arresters - Part 5: Selection and application recommendations - Section 1: General | 1999-10-20 | 구판 |
| 6 | IEC 60099-5:1996/COR1:1996 | Corrigendum 1 - Surge arresters - Part 5: Selection and application recommendations | 1996-05-22 | 구판 |
| 7 | IEC 60099-5:1996 | Surge arresters - Part 5: Selection and application recommendations - Section 1: General | 1996-02-26 | 구판 |
IEC 60099-1A:1965 - First supplement Replaced by IEC 99-5 상세보기
IEC TR 60099-3:1990 - Surge arresters. Part 3: Artificial pollution testing of surge arresters 상세보기
IEC 60099-1:1991 - Surge arresters - Part 1: Non-linear resistor type gapped arresters for a.c. systems 상세보기
IEC 60099-1:1991/AMD1:1999 - Amendment 1 - Surge arresters - Part 1: Non-linear resistor type gapped arresters for a.c. systems 상세보기
IEC 60099-1:1991+AMD1:1999 CSV - Surge arresters - Part 1: Non-linear resistor type gapped surge arresters for a.c. systems 상세보기
ASTM A490M-14a - Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints (Metric) (Withdrawn 2016) 상세보기
ASTM C411-19 - Standard Test Method for Hot-Surface Performance of High-Temperature Thermal Insulation 상세보기
ASTM A106/A106M-19a - Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service 상세보기
ASTM A307-21 - Standard Specification for Carbon Steel Bolts, Studs, and Threaded Rod 60?000 PSI Tensile Strength 상세보기
ASME B1.2-1983(R2017) - Gages and Gaging for Unified Inch Screw Threads (B1.2 - 1983) 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
