관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
표준
판매
Instruments and software used for measurements in high-voltage and high-current tests - Part 1: Requirements for instruments for impulse tests
| 분야 | TC 42 : High-voltage and high-current test techniques |
|---|---|
| 적용범위 | IEC 61083-1:2021 is applicable to digital recorders, including digital oscilloscopes, used for measurements during tests with high impulse voltages and high impulse currents. It specifies the measuring characteristics and calibrations required to meet the measuring uncertainties and procedures specified in IEC 60060-2 and IEC 62475. This document • defines the terms specifically related to digital recorders; • specifies the necessary requirements for such instruments to ensure their compliance with the requirements for high-voltage and high-current impulse tests; • establishes the tests and procedures necessary to demonstrate their compliance; • covers digital recorders that permit access to raw data from permanent or temporary storage; • covers peak meters used for measuring the extreme value of lightning impulses, the peak value of switching or current impulses. It has the status of a horizontal standard in accordance with IEC Guide 108. This horizontal standard is primarily intended for use by technical committees in the preparation of standards in accordance with the principles laid down in IEC Guide 108. One of the responsibilities of a technical committee is, wherever applicable, to make use of horizontal standards in the preparation of its publications. The contents of this horizontal standard will not apply unless specifically referred to or included in the relevant publications. This third edition cancels and replaces the second edition published in 2001. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) Requirements for static integral non-linearity and static differential non-linearity have been removed. b) Requirement for impulse scale factor non-linearity has been added. c) Uncertainty requirements for impulse calibrators have been revised. d) Requirements for peak voltmeter have been revised. |
| 국제분류(ICS)코드 |
17.220.20 : 전기 및 자기량 측정
19.080 : 전기 및 전자 시험 및 측정기구 |
| 페이지수 | 50 |
| Edition | 3.0 |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | IEC 61083-1:2021 | Instruments and software used for measurements in high-voltage and high-current tests - Part 1: Requirements for instruments for impulse tests | 2021-01-28 | 표준 |
| 2 | IEC 61083-1:2001 | Instruments and software used for measurement in high-voltage impulse tests - Part 1: Requirements for instruments | 2001-06-11 | 구판 |
| 3 | IEC 61083-1:1991 | Digital recorders for measurements in high voltage impulse tests - Part 1: Requirements for digital recorders | 1991-08-26 | 구판 |
IEC 61083-2:2013 - Instruments and software used for measurement in high-voltage and high-current tests - Part 2: Requirements for software for tests with impulse voltages and currents 상세보기
IEC 61083-3:2020 - Instruments and software used for measurement in high-voltage and high-current tests - Part 3: Requirements for hardware for tests with alternating and direct voltages and currents 상세보기
IEC 61083-3:2020 - Instruments and software used for measurement in high-voltage and high-current tests - Part 3: Requirements for hardware for tests with alternating and direct voltages and currents 상세보기
IEC 61083-2:2013 - Instruments and software used for measurement in high-voltage and high-current tests - Part 2: Requirements for software for tests with impulse voltages and currents 상세보기
IEC 60811-512:2012 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 512: Mechanical tests - Methods specific to polyethylene and polypropylene compounds - Tensile strength and elongation at break after conditioning at elevated temperature 상세보기
IEC 60811-405:2012 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 405: Miscellaneous tests - Thermal stability test for PVC insulations and PVC sheaths 상세보기
IEC 60794-3-11:2010 - Optical fibre cables - Part 3-11: Outdoor cables - Product specification for duct, directly buried, and lashed aerial single-mode optical fibre telecommunication cables 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
