관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
분야 | TC 20 : Electric cables |
---|---|
적용범위 | IEC 60754-1:2011+A1:2019 specifies the apparatus and procedure for the determination of the amount of halogen acid gas, other than hydrofluoric acid, evolved during the combustion of compounds based on halogenated polymers and compounds containing halogenated additives taken from electric or optical fibre cable constructions. The method specified in this standard is intended for the testing of individual components used in a cable construction. The use of this method will enable the verification of requirements which are stated in the appropriate cable specification for individual components of a cable construction. The significant technical changes with respect to the previous edition are as follows: - improved definition of safety requirements relating to capture of gases and use of reagents; - introduction of guidance on preparation of test specimens for a more even combustion; - improvements to the procedure for establishing the heating regime; - improved expression of tolerances and precision; - definition of the procedure for the blank test; - introduction of an informative annex giving details of a methodology for the determination of the halogen acid gas content of a sample representative of a cable construction. The contents of the corrigendum of November 2013 have been included in this copy. This consolidated version consists of the third edition (2011) and its amendment 1 (2019). Therefore, no need to order amendments in addition to this publication. |
국제분류(ICS)코드 |
13.220.40 : 자재 및 제품의 점화성 및 연소성
29.020 : 전기 공학 일반 29.060.20 : 케이블 |
페이지수 | 87 |
Edition | 3.1 |
No. | 표준번호 | 표준명 | 발행일 | 상태 |
---|---|---|---|---|
1 | IEC 60754-1:2011/AMD1:2019 | Amendment 1 - Test on gases evolved during combustion of materials from cables - Part 1: Determination of the halogen acid gas content | 2019-11-25 | 표준 |
2 | IEC 60754-1:2011+AMD1:2019 CSV | Test on gases evolved during combustion of materials from cables - Part 1: Determination of the halogen acid gas content | 2019-11-25 | 표준 |
3 | IEC 60754-1:2011/COR1:2013 | Corrigendum 1 - Test on gases evolved during combustion of materials from cables - Part 1: Determination of the halogen acid gas content | 2013-11-05 | 표준 |
4 | IEC 60754-1:2011 | Test on gases evolved during combustion of materials from cables - Part 1: Determination of the halogen acid gas content | 2011-11-17 | 표준 |
5 | IEC 60754-1:1994 | Test on gases evolved during combustion of materials from cables - Part 1: Determination of the amount of halogen acid gas | 1994-01-20 | 구판 |
6 | IEC 60754-1:1982 | Test on gases evolved during combustion of electric cables - Part 1: Determination of the amount of halogen acid gas evolved during the combustion of polymeric materials taken from cables | 1982-01-01 | 구판 |
IEC 60754-1:2011 - Test on gases evolved during combustion of materials from cables - Part 1: Determination of the halogen acid gas content 상세보기
IEC 60754-2:2011 - Test on gases evolved during combustion of materials from cables - Part 2: Determination of acidity (by pH measurement) and conductivity 상세보기
IEC 60754-1:2011/COR1:2013 - Corrigendum 1 - Test on gases evolved during combustion of materials from cables - Part 1: Determination of the halogen acid gas content 상세보기
IEC 60754-3:2018 - Test on gases evolved during combustion of materials from cables - Part 3: Measurement of low level of halogen content by ion chromatography 상세보기
IEC 60754-1:2011/AMD1:2019 - Amendment 1 - Test on gases evolved during combustion of materials from cables - Part 1: Determination of the halogen acid gas content 상세보기
IEC 60754-2:2011+AMD1:2019 CSV - Test on gases evolved during combustion of materials from cables - Part 2: Determination of acidity (by pH measurement) and conductivity 상세보기
IEC 61034-1:2005+AMD1:2013+AMD2:2019 CSV - Measurement of smoke density of cables burning under defined conditions - Part 1: Test apparatus 상세보기
IEC 60072-2:1990 - Dimensions and output series for rotating electrical machines - Part 2: Frame numbers 355 to 1000 and flange numbers 1180 to 2360 상세보기
IEC TR 60616:1978 - Terminal and tapping markings for power transformers 상세보기
IEC TR 61000-5-2:1997 - Electromagnetic compatibility (EMC) - Part 5: Installation and mitigation guidelines - Section 2: Earthing and cabling 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기