관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
표준
판매
Specification of technical grade sulphur hexafluoride (SF6) and complementary gases to be used in its mixtures for use in electrical equipment
| 분야 | TC 10 : Fluids for electrotechnical applications |
|---|---|
| 적용범위 | IEC 60376:2018 defines the quality for technical grade sulphur hexafluoride (SF6) and complementary gases such as nitrogen (N2) and carbon tetra-fluoride (CF4), for use in electrical equipment. Detection techniques, covering both laboratory and in-situ portable instrumentation, applicable to the analysis of SF6, N2 and CF4 gases prior to the introduction of these gases into the electrical equipment are also described in this document. This document provides some information on sulphur hexafluoride in Annex A and on the environmental effects of SF6 in Annex B. Information about SF6 by-products and the procedure for evaluating the potential effects of SF6 by-products on human health are covered by IEC 60480, their handling and disposal being carried out according to international and local regulations with regard to the impact on the environment. Handling of SF6 and its mixtures is covered by IEC 62271-4. Procedures to determine SF6 leakages are described in IEC 60068-2-17. For the purposes of this document, the complementary gases used in SF6 mixtures will be limited to N2 or CF4. This third edition cancels and replaces the second edition published in 2005. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) the requirements for the use of SF6 in electrical equipment have been confirmed; b) a specification for complementary gases to be used in SF6 mixtures with N2 and CF4 has been included; c) the introduction and scope have been merged; d) a new repartition of the annexes of IEC 60376, IEC 60480 and IEC 62271-4 has been included. |
| 국제분류(ICS)코드 | 29.040.20 : 절연재 |
| 페이지수 | 37 |
| Edition | 3.0 |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | IEC 60376:2018 | Specification of technical grade sulphur hexafluoride (SF6) and complementary gases to be used in its mixtures for use in electrical equipment | 2018-05-24 | 표준 |
| 2 | IEC 60376:2005 | Specification of technical grade sulfur hexafluoride (SF6) for use in electrical equipment | 2005-06-13 | 구판 |
| 3 | IEC 60376:1971 | Specification and acceptance of new sulphur hexafluoride | 1971-01-01 | 구판 |
관련상품이 존재하지 않습니다.
IEC 62271-4:2013 - High-voltage switchgear and controlgear - Part 4: Handling procedures for sulphur hexafluoride (SF6) and its mixtures 상세보기
IEC 60137:2017 - Insulated bushings for alternating voltages above 1000 V 상세보기
IEC 60480:2019 - Specifications for the re-use of sulphur hexafluoride (SF6) and its mixtures in electrical equipment 상세보기
IEC 62271-201:2014 - High-voltage switchgear and controlgear - Part 201: AC solid-insulation enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV 상세보기
IEC 62271-102:2018 - High-voltage switchgear and controlgear - Part 102: Alternating current disconnectors and earthing switches 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
