관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
표준
판매
Wind energy generation systems - Part 3-2: Design requirements for floating offshore wind turbines
| 분야 | TC 88 : Wind energy generation systems |
|---|---|
| 적용범위 | IEC TS 61400-3-2:2019 specifies additional requirements for assessment of the external conditions at a floating offshore wind turbine (FOWT) site and specifies essential design requirements to ensure the engineering integrity of FOWTs. Its purpose is to provide an appropriate level of protection against damage from all hazards during the planned lifetime. This document focuses on the engineering integrity of the structural components of a FOWT but is also concerned with subsystems such as control and protection mechanisms, internal electrical systems and mechanical systems. A wind turbine is considered as a FOWT if the floating substructure is subject to hydrodynamic loading and supported by buoyancy and a station-keeping system. A FOWT encompasses five principal subsystems: the RNA, the tower, the floating substructure, the station-keeping system and the on-board machinery, equipment and systems that are not part of the RNA. The following types of floating substructures are explicitly considered within the context of this document: a) ship-shaped structures and barges, b) semi-submersibles (Semi), c) spar buoys (Spar), d) tension-leg platforms/buoys (TLP / TLB). In addition to the structural types listed above, this document generally covers other floating platforms intended to support wind turbines. These other structures can have a great range of variability in geometry and structural forms and, therefore, can be only partly covered by the requirements of this document. In other cases, specific requirements stated in this document can be found not to apply to all or part of a structure under design. In all the above cases, conformity with this document will require that the design is based upon its underpinning principles and achieves a level of safety equivalent, or superior, to the level implicit in it. This document is applicable to unmanned floating structures with one single horizontal axis turbine. Additional considerations might be needed for multi-turbine units on a single floating substructure, vertical-axis wind turbines, or combined wind/wave energy systems. This document is to be used together with the appropriate IEC and ISO standards mentioned in Clause 2. In particular, this document is intended to be fully consistent with the requirements of IEC 61400-1 and IEC 61400-3-1. The safety level of the FOWT designed according to this document is to be at or exceed the level inherent in IEC 61400‑1 and IEC 61400-3-1. |
| 국제분류(ICS)코드 | 27.180 : 풍력 터빈 및 기타 대체 에너지원 |
| 페이지수 | 51 |
| Edition | 1.0 |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | IEC TS 61400-3-2:2019 | Wind energy generation systems - Part 3-2: Design requirements for floating offshore wind turbines | 2019-04-05 | 표준 |
IEC 61400-4 - Wind energy generation systems — Part 4: Design requirements for wind turbine gearboxes 상세보기
IEC 61400-12-0:1998 - Wind turbine generator systems - Part 12: Wind turbine power performance testing 상세보기
IEC TS 61400-23:2001 - Wind turbine generator systems - Part 23: Full-scale structural testing of rotor blades 상세보기
IEC TS 61400-13:2001 - Wind turbine generator systems - Part 13: Measurement of mechanical loads 상세보기
IEC TR 61400-24:2002 - Wind turbine generator systems - Part 24: Lightning protection 상세보기
IEC 61400-3-1:2019 - Wind energy generation systems - Part 3-1: Design requirements for fixed offshore wind turbines 상세보기
IEC 61400-1:2019 RLV - Wind energy generation systems - Part 1: Design requirements 상세보기
IEC 61400-3-1:2019 - Wind energy generation systems - Part 3-1: Design requirements for fixed offshore wind turbines 상세보기
IEC 61400-26-1:2019 - Wind energy generation systems - Part 26-1: Availability for wind energy generation systems 상세보기
IEC 61215-1-1:2016 - Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-1: Special requirements for testing of crystalline silicon photovoltaic (PV) modules 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
