관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
분야 | TC 23 : Electrical accessories |
---|---|
적용범위 | IEC 63044-3:2017 provides the electrical safety requirements related to the HBES/BACS network in addition to the product safety standards for HBES/BACS devices. It also applies to devices used within an HBES/BACS network for which no specific HBES/BACS product safety standard exists. In addition, it defines safety requirements for the interface of equipment intended to be connected to an HBES/BACS network. It does not apply to interfaces to other networks. NOTE An example of other networks is a dedicated ICT network covered by IEC 62949. This document is applicable to operator stations and other human–system interface devices, devices for management functions, control devices, automation stations and application-specific controllers, field devices and their interfaces, and cabling and interconnection of devices used within a dedicated HBES/BACS network. This document covers the following requirements and compliance criteria: protection from hazards in the device; protection from overvoltages on the network; protection from touch current; protection from hazards caused by different types of circuit; protection of the communication wiring from overheating caused by excessive current. |
국제분류(ICS)코드 |
29.120.99 : 기타 전기 부속품
29.120.01 : 전기부품일반 |
페이지수 | 38 |
Edition | 1.0 |
No. | 표준번호 | 표준명 | 발행일 | 상태 |
---|---|---|---|---|
1 | IEC 63044-3:2017/AMD1:2021 | Amendment 1 - Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 3: Electrical safety requirements | 2021-05-04 | 표준 |
2 | IEC 63044-3:2017+AMD1:2021 CSV | Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 3: Electrical safety requirements | 2021-05-04 | 표준 |
3 | IEC 63044-3:2017 | Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 3: Electrical safety requirements | 2017-01-27 | 표준 |
IEC 63044-5-3:2017 - Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 5-3: EMC requirements for HBES/BACS used in industrial environments 상세보기
IEC 63044-1:2017 - Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 1: General requirements 상세보기
IEC 63044-5-2:2017 - Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 5-2: EMC requirements for HBES/BACS used in residential, commercial and light-industrial environments 상세보기
IEC 63044-5-1:2017 - Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 5-1: EMC requirements, conditions and test set-up 상세보기
IEC 63044-3:2017/AMD1:2021 - Amendment 1 - Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 3: Electrical safety requirements 상세보기
IEC TS 63116:2021 - Lighting systems - General requirements 상세보기
IEC TS 63117:2021 - General requirements for lighting systems - Safety 상세보기
IEC TS 63105:2021 - Lighting systems and related equipment - Vocabulary 상세보기
IEC 62949:2017 - Particular safety requirements for equipment to be connected to information and communication technology networks 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기