관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
표준
판매
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements
| 분야 | TC 66 : Safety of measuring, control and laboratory equipment |
|---|---|
| 적용범위 | IEC 61010-1:2010+A1:2016 specifies general safety requirements for the following types of electrical equipment and their accessories, wherever they are intended to be used. a) Electrical test and measurement equipment b) Electrical industrial process-control equipment c) Electrical laboratory equipment This third edition cancels and replaces the second edition published in 2001. It constitutes a technical revision. This edition includes the following significant changes from the second edition, as well as numerous other changes. - The scope of the standard has been expanded to include all locations where these products may be used, so that both professional and non-professional versions of these products are within the scope. - The requirements for testing and measuring circuits (in various subclauses and the entirety of Clause 16) have been removed and included in a particular standard IEC 61010-2-030. - Insulation requirements (6.7) have been completely rewritten. - Additional requirements for protection against mechanical HAZARDS (Clause 7) have been included. - Surface temperature limits (Clause 10) have been modified to conform to the limits of EN 563. - Radiation requirements (Clause 12) have been modified, and take into account a distinction between intended emission and unintended emission. - Requirements for reasonably foreseeable misuse and ergonomic aspects have been added (Clause 16). - A new clause (Clause 17) has been added to deal with HAZARDS and environments not covered by the standard, along with a new informative annex (Annex J) dealing with RISK assessment. - A new informative annex (Annex E) addresses methods of reducing the POLLUTION DEGREE of a micro-environment. - Requirements for the qualification of coatings for protection against POLLUTION have been added (Annex H). - A new informative annex (Annex I) has been added to further explain how to determine the WORKING VOLTAGE of a MAINS CIRCUIT. The contents of the corrigendum 1 of May 2011, the interpretation sheet 1 of February 2013, the corrigendum 2 of October 2013 and the corrigendum 1 to Amendment 1 of March 2019 have been included in this copy. This consolidated version consists of the third edition (2010) and its amendment 1 (2016). Therefore, no need to order amendment in addition to this publication. |
| 국제분류(ICS)코드 |
19.080 : 전기 및 전자 시험 및 측정기구
71.040.10 : 화학 실험실. 실험실 장비 |
| 페이지수 | 666 |
| Edition | 3.1 |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | IEC 61010-1:2010/AMD1:2016/COR1:2019 | Corrigendum 1 - Amendment 1 - Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements | 2019-03-21 | 표준 |
| 2 | IEC 61010-1:2010+AMD1:2016 CSV | Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements | 2017-01-10 | 표준 |
| 3 | IEC 61010-1:2010/AMD1:2016 | Amendment 1 - Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements | 2016-12-16 | 표준 |
| 4 | IEC 61010-1:2010/COR2:2013 | Corrigendum 2 - Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements | 2013-10-10 | 표준 |
| 5 | IEC 61010-1:2010/COR1:2011 | Corrigendum 1 - Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements | 2011-05-11 | 표준 |
| 6 | IEC 61010-1:2010 | Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements | 2010-06-10 | 표준 |
| 7 | IEC 61010-1:2001/COR2:2003 | Corrigendum 2 - Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements | 2003-04-02 | 구판 |
| 8 | IEC 61010-1:2001/COR1:2002 | Corrigendum 1 - Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements | 2002-05-28 | 구판 |
| 9 | IEC 61010-1:2001 | Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements | 2001-02-13 | 구판 |
| 10 | IEC 61010-1:1990/COR1:1999 | Corrigendum 1 - Safety requirements for electrical equipment for measurement, control and laboratory use - Part 1: General requirements | 1999-04-30 | 구판 |
| 11 | IEC 61010-1:1990/AMD2:1995 | Amendment 2 - Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements | 1995-07-04 | 구판 |
| 12 | IEC 61010-1:1990/AMD1:1992 | Amendment 1 - Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements | 1992-09-30 | 구판 |
| 13 | IEC 61010-1:1990 | Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements | 1990-09-30 | 구판 |
IEC 61010-2-031:1993 - Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-031: Particular requirements for hand-held probe assemblies for electrical measurement and test 상세보기
IEC 61010-2-041:1995 - Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-041: Particular requirements for autoclaves using steam for the treatment of medical materials, and for laboratory processes 상세보기
IEC 61010-2-043:1997 - Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-043: Particular requirements for dry heat sterilizers using either hot air or hot inert gas for the treatment of medical materials, and for laboratory processes 상세보기
IEC 61010-2-042:1997 - Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-042: Particular requirements for autoclaves and sterilizers using toxic gas for the treatment of medical materials, and for laboratory processes 상세보기
IEC TR 61010-3-010:1999 - Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-010: Conformity verification report for IEC 61010-2-010, Particular requirements for laboratory equipment for the heating of materials 상세보기
IEC 61010-2-101:2018 - Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-101: Particular requirements for in vitro diagnostic (IVD) medical equipment 상세보기
ISO 14971:2019 - Medical devices — Application of risk management to medical devices 상세보기
IEC 62366-1:2015 - Medical devices - Part 1: Application of usability engineering to medical devices 상세보기
ISO 12100:2010 - Safety of machinery — General principles for design — Risk assessment and risk reduction 상세보기
IEC 62304:2006 - Medical device software - Software life cycle processes 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
