관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
구판
판매
Safety requirements for power electronic converter systems and equipment - Part 1: General
| 분야 | TC 22 : Power electronic systems and equipment |
|---|---|
| 적용범위 | IEC 62477-1:2012+AMD1:2016 applies to Power Electronic Converter Systems (PECS) and equipment, their components for electronic power conversion and electronic power switching, including the means for their control, protection, monitoring and measurement, such as with the main purpose of converting electric power, with rated system voltages not exceeding 1 000 V a.c. or 1 500 V d.c. This document may also be used as a reference standard for product committees producing product standards for: - adjustable speed electric power drive systems (PDS); - standalone uninterruptible power systems (UPS); - low voltage stabilized d.c. power supplies. For PECS for which no product standard exists, this standard provides minimum requirements for safety aspects. This part of IEC 62477 has the status of a group safety publication in accordance with IEC Guide 104 for power electronic converter systems and equipment for solar, wind, tidal, wave, fuel cell or similar energy sources. According to IEC Guide 104, one of the responsibilities of technical committees is, wherever applicable, to make use of basic safety publications and/or group safety publications in the preparation of their product standards. This International Standard: - establishes a common terminology for safety aspects relating to PECS and equipment; - establishes minimum requirements for the coordination of safety aspects of interrelated parts within a PECS; - establishes a common basis for minimum safety requirements for the PEC portion of products that contain PEC; - specifies requirements to reduce risks of fire, electric shock, thermal, energy and mechanical hazards, during use and operation and, where specifically stated, during service and maintenance; - specifies minimum requirements to reduce risks with respect to pluggable and permanently connected equipment, whether it consists of a system of interconnected units or independent units, subject to installing, operating and maintaining the equipment in the manner prescribed by the manufacturer. This International Standard does not cover: - telecommunications apparatus other than power supplies to such apparatus; - functional safety aspects as covered by e.g. IEC 61508; - electrical equipment and systems for railways applications and electric vehicles. This consolidated version consists of the first edition (2012) and its amendment 1 (2016). Therefore, no need to order amendment in addition to this publication. |
| 국제분류(ICS)코드 | 29.200 : 정류기. 변환기. 안정된 동력공급원 |
| 페이지수 | 828 |
| Edition | 1.1 |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | IEC 62477-1:2022/COR1:2024 | Corrigendum 1 - Safety requirements for power electronic converter systems and equipment - Part 1: General | 2024-04-17 | 표준 |
| 2 | IEC 62477-1:2022 | Safety requirements for power electronic converter systems and equipment - Part 1: General | 2022-05-20 | 표준 |
| 3 | IEC 62477-1:2012/AMD1:2016 | Amendment 1 - Safety requirements for power electronic converter systems and equipment - Part 1: General | 2016-07-28 | 구판 |
| 4 | IEC 62477-1:2012+AMD1:2016 CSV | Safety requirements for power electronic converter systems and equipment - Part 1: General | 2016-07-28 | 구판 |
| 5 | IEC 62477-1:2012 | Safety requirements for power electronic converter systems and equipment - Part 1: General | 2012-07-24 | 구판 |
IEC 62477-2:2018 - Safety requirements for power electronic converter systems and equipment - Part 2: Power electronic converters from 1 000 V AC or 1 500 V DC up to 36 kV AC or 54 kV DC 상세보기
IEC 62477-1:2022 - Safety requirements for power electronic converter systems and equipment - Part 1: General 상세보기
IEC 62477-1:2022/COR1:2024 - Corrigendum 1 - Safety requirements for power electronic converter systems and equipment - Part 1: General 상세보기
AS IEC 62040.3-2012 - Uninterruptible power systems (UPS) Method of specifying the performance and test requirements 상세보기
AS IEC 62040.2:2019 - Uninterruptible power systems (UPS) Electromagnetic compatibility (EMC) requirements 상세보기
AS/NZS 3100:2017 - Approval and test specification - General requirements for electrical equipment 상세보기
IEC 62109-1:2010 - Safety of power converters for use in photovoltaic power systems - Part 1: General requirements 상세보기
IEC 61000-3-12:2011 - Electromagnetic compatibility (EMC) - Part 3-12: Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current >16 A and ≤ 75 A per phase 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
