관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
구판
판매
Rotating electrical machines - Part 25: AC electrical machines used in power drive systems - Application guide
| 분야 | TC 2 : Rotating machinery |
|---|---|
| 적용범위 | IEC TS 60034-25:2014 describes the performance characteristics of a.c. electrical machines for use on converter supplies. For electrical machines specifically designed for converter duty application design features are defined. It also specifies the interface parameters and interactions between the electrical machine and the converter including installation guidance as part of a power drive system, but except for the voltage at the power interface which is described in IEC 61800-8. The main technical changes with regard to the previous edition are as follows: - merging of IEC TS 60034-17 into IEC TS 60034-25 adding a clause which now includes all specific requirements for standard non-definite purpose electric machines; - removal of Annex C: Noise increments due to converter supply. |
| 국제분류(ICS)코드 | 29.160.01 : 회전기계 일반 |
| 페이지수 | 180 |
| Edition | 3.0 |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | IEC TS 60034-25:2022 | Rotating electrical machines - Part 25: AC electrical machines used in power drive systems - Application guide | 2022-06-27 | 표준 |
| 2 | IEC TS 60034-25:2022 CMV | Rotating electrical machines - Part 25: AC electrical machines used in power drive systems - Application guide | 2022-06-27 | 표준 |
| 3 | IEC TS 60034-25:2014 | Rotating electrical machines - Part 25: AC electrical machines used in power drive systems - Application guide | 2014-10-08 | 구판 |
| 4 | IEC TS 60034-25:2007 | Rotating electrical machines - Part 25: Guidance for the design and performance of a.c. motors specifically designed for converter supply | 2007-03-12 | 구판 |
| 5 | IEC TS 60034-25:2004 | Rotating electrical machines - Part 25: Guide for the design and performance of cage induction motors specifically designed for converter supply | 2004-04-21 | 구판 |
IEC 60034-2:1972 - Rotating electrical machines. Part 2: Methods for determining losses and efficiency of rotating electrical machinery from tests (excluding machines for traction vehicles) 상세보기
IEC 60034-2A:1974 - Rotating electrical machines - Part 2: Methods for determining losses and efficiency of rotating electrical machinery form tests (excluding machines for traction vehicles) - Measurement of losses by the calorimetric method 상세보기
IEC 60034-10:1975 - Rotating electrical machines. Part 10: Conventions for description of synchronous machines 상세보기
IEC 60034-13:1980 - Rotating electrical machines. Part 13: Specification for mill auxiliary motors 상세보기
IEC 60034-11-2:1984 - Rotating electrical machines - Part 11: Built-in thermal protection - Chapter 2: Thermal detectors and control units used in thermal protection systems 상세보기
IEC 60034-6:1991 - Rotating electrical machines - Part 6: Methods of cooling (IC Code) 상세보기
IEC TS 60034-16-3:1996 - Rotating electrical machines - Part 16: Excitation systems for synchronous machines - Section 3: Dynamic performance 상세보기
IEC 60146-2:1999 - Semiconductor converters - Part 2: Self-commutated semiconductor converters including direct d.c. converters 상세보기
IEC 60076-4:2002 - Power transformers - Part 4: Guide to the lightning impulse and switching impulse testing - Power transformers and reactors 상세보기
IEC 60076-5:2006 - Power transformers - Part 5: Ability to withstand short circuit 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
