관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
표준
판매
Liquid crystal display devices - Part 30-1: Measuring methods for liquid crystal display modules - Transmissive type
| 분야 | TC 110 : Electronic displays |
|---|---|
| 적용범위 | IEC 61747-30-1:2012 is restricted to transmissive liquid crystal display-modules using either segment, passive or active matrix and achromatic or colour type LCDs. Furthermore, the transmissive modes of transflective LCD modules with backlights ON are comprised in this document. An LCD module in combination with a touch-panel or a front-light-unit is excluded from the scope because measurements are frequently inaccurate. Touch-panels or front-light-units are removed before measurement. Throughout the main body of this standard, an integrated backlight is assumed to provide the illumination for the measurements. Deviations from this (e.g. segmented displays without integrated backlights) may usually be handled in the same way as display modules with integrated backlight, if an external backlight is provided. However, in the case where one of the two situations should be handled differently, this will be specifically stated. This first edition cancels and replaces IEC 61747-6 published in 2004. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) the document structure was brought in line with 61747-6-2; and b) various technical and editorial changes were made. This publication is to be read in conjunction with IEC 61747-1:1998. |
| 국제분류(ICS)코드 | 31.120 : 전자표시 장치 |
| 페이지수 | 95 |
| Edition | 1.0 |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | IEC 61747-30-1:2012 | Liquid crystal display devices - Part 30-1: Measuring methods for liquid crystal display modules - Transmissive type | 2012-06-25 | 표준 |
IEC 61747-1:1998 - Liquid crystal and solid-state display devices - Part 1: Generic specification 상세보기
IEC 61747-5:1998 - Liquid crystal and solid-state display devices - Part 5: Environmental, endurance and mechanical test methods 상세보기
IEC 61747-1:1998/AMD1:2003 - Amendment 1 - Liquid crystal and solid-state display devices - Part 1: Generic specification 상세보기
IEC 61747-1:1998+AMD1:2003 CSV - Liquid crystal and solid-state display devices - Part 1: Generic specification 상세보기
IEC 61747-6:2004 - Liquid crystal and solid-state display devices - Part 6: Measuring methods for liquid crystal modules - Transmissive type 상세보기
KS C IEC 62341-6-1 - 유기발광다이오드 디스플레이 —제6-1부: 광학적, 전기광학적 특성 측정 방법 상세보기
IEC 61747-5:1998 - Liquid crystal and solid-state display devices - Part 5: Environmental, endurance and mechanical test methods 상세보기
IEC 60068-2-13:1983 - Basic environmental testing procedures - Part 2-13: Tests - Test M: Low air pressure 상세보기
ASTM F3299-18 - Standard Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using an Electrolytic Detection Sensor (Coulometric P
MIL-STD-810 :2019(H) - ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
