관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
폐지
판매
Information technology - Radio frequency identification for item management - Part 1: Reference architecture and definition of parameters to be standardized
| 분야 | ISO/IEC JTC 1/SC 31 : Automatic identification and data capture techniques |
|---|---|
| 적용범위 | ISO/IEC 18000-1:2008 defines the generic architecture concepts in which item identification may commonly be required within the logistics and supply chain and defines the parameters that need to be determined in any standardized air interface definition in the subsequent parts of ISO/IEC 18000. The subsequent parts of ISO/IEC 18000 provide the specific values for definition of the air interface parameters for a particular frequency/type of air interface from which compliance (or non-compliance) with ISO/IEC 18000-1:2008 can be established. ISO/IEC 18000-1:2008 also provides a description of example conceptual architectures in which these air interfaces are often to be utilized. ISO/IEC 18000-1:2008 limits its scope to transactions and data exchanges across the air interface at reference point delta. The means of generating and managing such transactions, other than a requirement to achieve the transactional performance determined within ISO/IEC 18000-1:2008, are outside the scope of ISO/IEC 18000-1:2008, as is the definition or specification of any supporting hardware, firmware, software or associated equipment. Standardization of other reference points is outside the scope of ISO/IEC 18000-1:2008. ISO/IEC 18000-1:2008 is an enabling standard which supports and promotes several RFID implementations without making conclusions about the relative technical merits of any available option for any possible application. ISO/IEC 18000-1:2008 also provides reference information in respect of patents that have been declared to the developers of ISO/IEC 18000 as pertinent and provides reference addresses in respect of regulations under which ISO/IEC 18000 must operate. |
| 국제분류(ICS)코드 | 35.040.50 : 자동인식 및 데이터 획득 자동화 |
| 페이지수 | 48 |
| Edition | 2.0 |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | ISO/IEC 18000-1:2008 | Information technology - Radio frequency identification for item management - Part 1: Reference architecture and definition of parameters to be standardized | 2008-06-23 | 폐지 |
| 2 | ISO/IEC 18000-1:2008 | Information technology — Radio frequency identification for item management — Part 1: Reference architecture and definition of parameters to be standardized | 2008-06-23 | 폐지 |
| 3 | ISO/IEC 18000-1:2004 | Information technology - Radio frequency identification for item management - Part 1: Reference architecture and definition of parameters to be standardized | 2004-09-13 | 구판 |
| 4 | ISO/IEC 18000-1:2004 | Information technology — Radio frequency identification for item management — Part 1: Reference architecture and definition of parameters to be standardized | 2004-09-13 | 구판 |
ISO/IEC DIS 18000-65 - Information technology — Radio frequency identification for item management — Part 65: Parameters for air interface communications for streaming sensors based on ISO/IEC 18000-63 상세보기
ISO/IEC DIS 18000-6 - Information technology — Radio frequency identification for item management — Part 6: Parameters for air interface communications at 860 MHz to 960 MHz General 상세보기
ISO/IEC 18000-1:2008 - Information technology — Radio frequency identification for item management — Part 1: Reference architecture and definition of parameters to be standardized 상세보기
ISO/IEC 18000-2:2009 - Information technology - Radio frequency identification for item management - Part 2: Parameters for air interface communications below 135 kHz 상세보기
ISO/IEC 18000-2:2009 - Information technology — Radio frequency identification for item management — Part 2: Parameters for air interface communications below 135 kHz 상세보기
함께 구입한 상품이 존재하지 않습니다.
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
