관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
구판
판매
Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests
| 분야 | TC 109 : Insulation co-ordination for low-voltage equipment |
|---|---|
| 적용범위 | IEC 60664-1:2007 Deals with insulation coordination for equipment within low-voltage systems. It applies to equipment for use up to 2 000 m above sea level having a rated voltage up to a.c. 1 000 V with rated frequencies up to 30 kHz, or a rated voltage up to d.c. 1 500 V. It specifies the requirements for clearances, creepage distances and solid insulation for equipment based upon their performance criteria. It includes methods of electric testing with respect to insulation coordination. The minimum clearances specified in this standard do not apply where ionized gases occur. Special requirements for such situations may be specified at the discretion of the relevant technical committee. This standard does not deal with distances: - through liquid insulation, - through gases other than air, - through compressed air. Main changes have been made with respect to the previous edition: - Amendment of Japanese mains conditions with regard to the rated impulse voltages, the rationalized voltages and the nominal voltages of supply systems for different modes of overvoltage control - Amendment of dimensioning of clearances smaller than 0,01 mm - Alignment of the table and the corresponding formula regarding test voltages for verifying clearances at different altitudes - Amendment of interpolation of the creepage distance values for functional insulation - Amendment of creepage distance dimensioning taking into account ribs - Revision of the former Clause 4 "Tests and measurements" (now Clause 6) to achieve a more detailed description of the tests and their purpose, the test equipment and possible alternatives - Change of Annex C "Partial discharge test methods" from a former technical report, Type 2 (now called TS), to a normative Annex C. |
| 국제분류(ICS)코드 | 29.080.30 : 절연 시스템 |
| 페이지수 | 148 |
| Edition | 2.0 |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | IEC 60664-1:2020/COR1:2020 | Corrigendum 1 - Insulation coordination for equipment within low-voltage supply systems - Part 1: Principles, requirements and tests | 2020-10-27 | 표준 |
| 2 | IEC 60664-1:2020 | Insulation coordination for equipment within low-voltage supply systems - Part 1: Principles, requirements and tests | 2020-05-26 | 표준 |
| 3 | IEC 60664-1:2007 | Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests | 2007-04-26 | 구판 |
| 4 | IEC 60664-1:1992+AMD1:2000+AMD2:2002 CSV/COR1:2002 | Corrigendum 1 - Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests | 2002-11-15 | 구판 |
| 5 | IEC 60664-1:1992+AMD1:2000+AMD2:2002 CSV | Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests | 2002-06-26 | 구판 |
| 6 | IEC 60664-1:1992/AMD2:2002 | Amendment 2 - Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests | 2002-05-21 | 구판 |
| 7 | IEC 60664-1:1992+AMD1:2000 CSV | Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests | 2000-04-28 | 구판 |
| 8 | IEC 60664-1:1992/AMD1:2000 | Amendment 1 - Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests | 2000-02-11 | 구판 |
| 9 | IEC 60664-1:1992 | Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests | 1992-10-01 | 구판 |
IEC TR 60664-2-2:2002 - Insulation coordination for equipment within low-voltage systems - Part 2-2: Interface considerations - Application guide 상세보기
IEC 60664-4:2005 - Insulation coordination for equipment within low-voltage systems - Part 4: Consideration of high-frequency voltage stress 상세보기
IEC 60664-5:2007 - Insulation coordination for equipment within low-voltage systems - Part 5: Comprehensive method for determining clearances and creepage distances equal to or less than 2 mm 상세보기
IEC TR 60664-2-1:2011 - Insulation coordination for equipment within low-voltage systems - Part 2-1: Application guide - Explanation of the application of the IEC 60664 series, dimensioning examples and dielectric testing 상세보기
IEC TR 60664-2-1:2011/COR1:2011 - Corrigendum 1 - Insulation coordination for equipment within low-voltage systems - Part 2-1: Application guide - Explanation of the application of the IEC 60664 series, dimensioning examples and dielectric testing 상세보기
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV - Degrees of protection provided by enclosures (IP Code) 상세보기
IEC 61851-1:2017 - Electric vehicle conductive charging system - Part 1: General requirements 상세보기
SAE J2836_201807 - Instructions for Using Plug-In Electric Vehicle (PEV) Communications, Interoperability and Security Documents 상세보기
SAE J1772_201710 - SAE Electric Vehicle and Plug in Hybrid Electric Vehicle Conductive Charge Coupler 상세보기
KS R IEC 62196-1 - 플러그, 소켓-아웃렛, 자동차 커넥터 및 자동차 인렛 — 전기자동차의 전도성 충전 — 제1부: 일반 요구사항 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
