관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
구판
판매
Safety of laser products - Part 1: Equipment classification and requirements
| 분야 | TC 76 : Optical radiation safety and laser equipment |
|---|---|
| 적용범위 | IEC 60825-1 is applicable to safety of laser products emitting laser radiation in the wavelength range 180 nm to 1 mm. A laser product may consist of a single laser with or without a separate power supply or may incorporate one or more lasers in a complex optical, electrical, or mechanical system. Typically, laser products are used for demonstration of physical and optical phenomena, materials processing, data reading and storage, transmission and display of information, etc. Such systems have found use in industry, business, entertainment, research, education, medicine and consumer products. Laser products that are sold to other manufacturers for use as components of any system for subsequent sale are not subject to IEC 60825-1, since the final product will itself be subject to this standard. However, if the laser system within the laser product is operable when removed from the equipment, the requirements of this Part 1 apply to the removable unit. Any laser product is exempt from all further requirements of this Part 1 if classification by the manufacturer of that product according to Clauses 3, 8 and 9 shows that the emission level does not exceed the AEL (accessible emission limit) of Class 1 under all conditions of operation, maintenance, service and failure. In addition to the hazards resulting from laser radiation, laser equipment may also give rise to other hazards such as fire and electric shock. This Part 1 describes the minimum requirements. Compliance with this Part 1 may not be sufficient to achieve the required level of product safety. Laser products must conform to the applicable performance and testing requirements of the applicable product safety standards. Where a laser system forms a part of equipment which is subject to another IEC product safety standard (e.g. for medical equipment (IEC 60601-2-22), IT equipment (IEC 60950), audio and video equipment (IEC 60065), equipment for use in hazardous atmospheres (IEC 60079), or electric toys (IEC 62115)), this Part 1 will apply in accordance with the provisions of IEC Guide 104 ) for hazards resulting from laser radiation. If no product safety standard is applicable, then IEC 61010-1 applies. In previous editions, LEDs were included in the scope of IEC 60825-1, and they may be still included in other parts of the IEC 60825 series. However, with the development of lamp safety standards, optical radiation safety of LEDs in general can be more appropriately addressed by lamp safety standards. The removal of LEDs from the scope of this Part 1 does not preclude other standards from including LEDs whenever they refer to lasers. CIE S009 may be applied to determine the risk group class of an LED or product incorporating one or more LEDs. The MPE (maximum permissible exposure) values of this Part 1 were developed for laser radiation and do not apply to collateral radiation. However, if a concern exists that accessible collateral radiation might be hazardous, the laser MPE values may be applied to conservatively evaluate this potential hazard. The MPE values are not applicable to intentional human exposure to laser radiation for the purpose of medical or cosmetic/aesthetic treatment. The objectives of this part of IEC 60825 are the following: - to introduce a system of classification of lasers and laser products according to their degree of optical radiation hazard in order to aid hazard evaluation and to aid the determination of user control measures; - to establish requirements for the manufacturer to supply information so that proper precautions can be adopted; - to ensure, through labels and instructions, adequate warning to individuals of hazards associated with accessible radiation from laser products; - to reduce the possibility of injury by minimizing unnecessary accessible radiation and to give improved control of the laser radiation hazards through protective features. This second edition of IEC 60825-1 cancels and replaces the first edition published in 1993, its Amendment 1 (1997) and its Amendment 2 (2001). It constitutes a technical revision. The user's guide has been removed from this part of the IEC 60825 series and is now a separate document (Part 14). Light emitting diodes (LEDs) have been removed from the scope of this part of IEC 60825, but may still be included in other parts. This part of IEC 60825 has the status of a Group Safety Publication, in accordance with IEC Guide 104, for aspects of laser radiation pertaining to human safety. The contents of the corrigendum of August 2008 and the interpretation sheet 1 of December 2009 have been included in this copy. |
| 국제분류(ICS)코드 |
31.260 : 광전자공학. 레이저 장비
13.110 : 기계 안전성 |
| 페이지수 | 199 |
| Edition | 2.0 |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | IEC 60825-1:2014 | Safety of laser products - Part 1: Equipment classification and requirements | 2014-05-15 | 표준 |
| 2 | IEC 60825-1:2007/COR1:2008 | Corrigendum 1 - Safety of laser products - Part 1: Equipment classification and requirements | 2008-08-12 | 구판 |
| 3 | IEC 60825-1:2007 | Safety of laser products - Part 1: Equipment classification and requirements | 2007-03-30 | 구판 |
| 4 | IEC 60825-1:1993/AMD2:2001/COR1:2002 | Corrigendum 1 to Amendment 2 - Safety of laser products - Part 1: Equipment classification, requirements and user's guide | 2002-06-24 | 구판 |
| 5 | IEC 60825-1:1993+AMD1:1997+AMD2:2001 CSV | Safety of laser products - Part 1: Equipment classification, requirements and user's guide | 2001-08-30 | 구판 |
| 6 | IEC 60825-1:1993/AMD2:2001 | Amendment 2 - Safety of laser products - Part 1: Equipment classification, requirements and user's guide | 2001-01-19 | 구판 |
| 7 | IEC 60825-1:1993+AMD1:1997 CSV | Safety of laser products - Part 1: Equipment classification, requirements and user's guide | 1998-01-15 | 구판 |
| 8 | IEC 60825-1:1993/AMD1:1997 | Amendment 1 - Safety of laser products - Part 1: Equipment classification, requirements and user's guide | 1997-09-17 | 구판 |
| 9 | IEC 60825-1:1993/COR1:1994 | Safety of laser products - Part 1: Equipment classification, requirements and user's guide | 1994-12-01 | 구판 |
| 10 | IEC 60825-1:1993 | Safety of laser products - Part 1: Equipment classification, requirements and user's guide | 1993-11-30 | 구판 |
IEC TS 60825-6:1999 - Safety of laser products - Part 6: Safety of products with optical sources, exclusively used for visible information transmission to the human eye 상세보기
IEC TR 60825-9:1999 - Safety of laser products - Part 9: Compilation of maximum permissible exposure to incoherent optical radiation 상세보기
IEC TS 60825-7:2000 - Safety of laser products - Part 7: Safety of products emitting infrared optical radiation, exclusively used for wireless 'free air' data transmission and surveillance 상세보기
IEC TR 60825-10:2002 - Safety of laser products - Part 10: Application guidelines and explanatory notes to IEC 60825-1 상세보기
IEC TR 60825-13:2011 - Safety of laser products - Part 13: Measurements for classification of laser products 상세보기
함께 구입한 상품이 존재하지 않습니다.
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
