관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
구판
판매
Rotating electrical machines - Part 14: Mechanical vibration of certain machines with shaft heights 56 mm and higher - Measurement, evaluation and limits of vibration severity
| 분야 | TC 2 : Rotating machinery |
|---|---|
| 적용범위 | Specifies the factory acceptance vibration test procedures and vibration limits for certain electrical machines under specified conditions, when uncoupled from any load or prime mover. Is applicable to d.c. and three-phase a.c. machines, with shaft heights 56 mm and higher and a rated output up to 50 MW, at operational speeds up to 15 000 per minute. |
| 국제분류(ICS)코드 | 29.160.01 : 회전기계 일반 |
| 페이지수 | 29 |
| Edition | 3.0 |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | IEC 60034-14:2018 RLV | Rotating electrical machines - Part 14: Mechanical vibration of certain machines with shaft heights 56 mm and higher - Measurement, evaluation and limits of vibration severity | 2018-08-17 | 표준 |
| 2 | IEC 60034-14:2018 | Rotating electrical machines - Part 14: Mechanical vibration of certain machines with shaft heights 56 mm and higher - Measurement, evaluation and limits of vibration severity | 2018-08-17 | 표준 |
| 3 | IEC 60034-14:2003+AMD1:2007 CSV | Rotating electrical machines - Part 14: Mechanical vibration of certain machines with shaft heights 56 mm and higher - Measurement, evaluation and limits of vibration severity | 2007-03-29 | 구판 |
| 4 | IEC 60034-14:2003/AMD1:2007 | Amendment 1 - Rotating electrical machines - Part 14: Mechanical vibration of certain machines with shaft heights 56 mm and higher - Measurement, evaluation and limits of vibration severity | 2007-02-20 | 구판 |
| 5 | IEC 60034-14:2003 | Rotating electrical machines - Part 14: Mechanical vibration of certain machines with shaft heights 56 mm and higher - Measurement, evaluation and limits of vibration severity | 2003-11-26 | 구판 |
| 6 | IEC 60034-14:1996 | Rotating electrical machines - Part 14: Mechanical vibration of certain machines with shaft heights 56 mm and higher - Measurement, evaluation and limits of vibration | 1996-11-14 | 구판 |
| 7 | IEC 60034-14:1982/COR1:1984 | Corrigendum 1 - Rotating electrical machines - Part 14: Mechanical vibration of certain machines with shaft heights 56 mm and higher - Measurement, evaluation and limits of the vibration severity | 1984-08-30 | 구판 |
| 8 | IEC 60034-14:1982 | Rotating electrical machines - Part 14: Mechanical vibration of certain machines with shaft heights 56 mm and higher - Measurement, evaluation and limits of the vibration severity | 1982-01-01 | 구판 |
| 9 | IEC 60034-14:1982 CSV | Rotating electrical machines - Part 14: Mechanical vibration of certain machines with shaft heights 56 mm and higher - Measurement, evaluation and limits of the vibration severity | 1982-01-01 | 구판 |
IEC 60034-2:1972 - Rotating electrical machines. Part 2: Methods for determining losses and efficiency of rotating electrical machinery from tests (excluding machines for traction vehicles) 상세보기
IEC 60034-2A:1974 - Rotating electrical machines - Part 2: Methods for determining losses and efficiency of rotating electrical machinery form tests (excluding machines for traction vehicles) - Measurement of losses by the calorimetric method 상세보기
IEC 60034-10:1975 - Rotating electrical machines. Part 10: Conventions for description of synchronous machines 상세보기
IEC 60034-13:1980 - Rotating electrical machines. Part 13: Specification for mill auxiliary motors 상세보기
IEC 60034-11-2:1984 - Rotating electrical machines - Part 11: Built-in thermal protection - Chapter 2: Thermal detectors and control units used in thermal protection systems 상세보기
ASME BPVC-I 2013 Edition - SECTION I: RULES FOR CONSTRUCTION OF POWER BOILERS 상세보기
VDI 2059 Blatt 5:1982-10 - Wellenschwingungen von Wasserkraftmaschinensätzen; Messung und Beurteilung 상세보기
VDI 2059 Blatt 4:1981-11 - Wellenschwingungen von Gasturbosätzen; Messung und Beurteilung 상세보기
VDI 2059 Blatt 3:1985-10 - Wellenschwingungen von Industrieturbosätzen; Messung und Beurteilung 상세보기
VDI 2059 Blatt 2:1990-06 - Wellenschwingungen von Dampfturbosätzen für Kraftwerke - Messung und Beurteilung 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
