관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
구판
판매
Fire hazard testing - Part 11-20: Test flames - 500 W flame test methods
| 분야 | TC 89 : Fire hazard testing |
|---|---|
| 적용범위 | Specifies a small-scale laboratory screening procedure for comparing the relative burning behaviour of specimens made from plastics and other non-metallic materials, as well as their resistance to burn-through when exposed to a flame ignition source of 500 W nominal power. This method is applicable to both solid materials and cellular plastic materials having an apparent density of 250 kg/m3 or greater when determined in accordance with ISO 845. It does not apply to thin materials that shrink away from the applied flame without igniting, for which ISO 9773 should be used. The test method described is intended to characterize material performance, for example for quality-control purposes, and is not intended to assess the behaviour to fire of building materials or furnishings. It may be used for the pre-selection of a material, provided that positive results are obtained at a thickness which equals the smallest thickness used in the application. The results obtained provide some information about the behaviour of plastic materials in service, but can never by themselves assure safe performance in service. This test method provides a classification system which may be used for quality assurance or the pre-selection of component materials of products. Has the status of a basic safety publication in accordance with Guide 104. The contents of the corrigendum of February 2000 have been included in this copy. This consolidated version consists of the first edition (1999) and its amendment 1 (2003). Therefore, no need to order amendment in addition to this publication. |
| 국제분류(ICS)코드 |
13.220.40 : 자재 및 제품의 점화성 및 연소성
29.020 : 전기 공학 일반 |
| 페이지수 | 39 |
| Edition | 1.1 |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | IEC 60695-11-20:2015/COR1:2016 | Corrigendum 1 - Fire hazard testing - Part 11-20: Test flames - 500 W flame test method | 2016-01-27 | 표준 |
| 2 | IEC 60695-11-20:2015 | Fire hazard testing - Part 11-20: Test flames - 500 W flame test method | 2015-04-22 | 표준 |
| 3 | IEC 60695-11-20:1999+AMD1:2003 CSV | Fire hazard testing - Part 11-20: Test flames - 500 W flame test methods | 2003-08-14 | 구판 |
| 4 | IEC 60695-11-20:1999/AMD1:2003 | Amendment 1 - Fire hazard testing - Part 11-20: Test flames - 500 W flame test methods | 2003-06-26 | 구판 |
| 5 | IEC 60695-11-20:1999/COR1:2000 | Corrigendum 1 - Fire hazard testing - Part 11-20: Test flames - 500 W flame test methods | 2000-02-29 | 구판 |
| 6 | IEC 60695-11-20:1999 | Fire hazard testing - Part 11-20: Test flames - 500 W flame test methods | 1999-03-31 | 구판 |
IEC 60695-1-2:1982 - Fire hazard testing. Part 1: Guidance for the preparation of requirements and test specifications for assessing fire hazard of electrotechnical products. Guidance for electronic components 상세보기
IEC 60695-3-1:1982 - Fire hazard testing. Part 3: Examples of fire hazard assessment procedures and interpretation of results. Combustion characteristics and survey of test methods for their determination 상세보기
IEC 60695-2-3:1984 - Fire hazard testing. Part 2: Test methods. Bad-connection test with heaters 상세보기
IEC 60695-1-3:1986 - Fire hazard testing. Part 1: Guidance for the preparation of requirements and test specifications for assessing fire hazard of electrotechnical products. Guidance for use of preselection procedures 상세보기
IEC 60695-2-4/1:1991 - Fire hazard testing - Part 2: Test methods - Section 4/Sheet 1: 1 kW nominal pre-mixed test flame and guidance 상세보기
함께 구입한 상품이 존재하지 않습니다.
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
