관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
표준
판매
Terrestrial photovoltaic (PV) modules — Design qualification and type approval — Part 1-3: Special requirements for testing of thin-film amorphous silicon based photovoltaic (PV) modules (Adopted IEC 61215-1-3:2016, first edition, 2016-12) | Modules photo
| 분야 | |
|---|---|
| 적용범위 | CSA Preface This is the first edition of CAN/CSA-IEC 61215-1-3, Terrestrial photovoltaic (PV) modules ? Design qualification and type approval ? Part 1-3: Special requirements for testing of thin-film amorphous silicon based photovoltaic (PV) modules, which is an adoption without modification of the identically titled IEC (International Electrotechnical Commission) Standard 61215-1-3 (first edition, 2016-12). It replaces CAN/CSA-IEC 61646:10, Thin-film terrestrial photovoltaic (PV) modules ? Design qualification and type approval (adopted IEC 61646:2008). For brevity, this Standard will be referred to as "CAN/CSA-IEC 61215-1-3" throughout. This Standard is intended to be used in conjunction with CAN/CSA-IEC 61215-1:18, Terrestrial photovoltaic (PV) modules ? Design qualification and type approval ? Part 1: Test requirements (adopted IEC 61215-1:2016) and CAN/CSA-IEC 61215-2:18, Terrestrial photovoltaic (PV) modules ? Design qualification and type approval ? Part 2: Test procedures (adopted IEC 61215-2:2016). This Standard identifies requirements for the design qualification and type approval of terrestrial photovoltaic modules suitable for long-term operation in general open-air climates, as defined in IEC 60721-2-1:2013, Classification of environmental conditions ? Part 2-1: Environmental conditions appearing in nature ? Temperature and humidity. This Standard is intended to apply to all thin-film amorphous silicon (a-Si; a-Si/μc-Si) based terrestrial flat plate modules. As such, it addresses special requirements for testing of this technology supplementing CAN/CSA-IEC 61215-1:2018 and CAN/CSA-IEC 61215-2:2018 requirements for testing. This Standard defines PV technology dependent modifications to the testing procedures and requirements per CAN/CSA-IEC 61215-1:2018 and CAN/CSA-IEC 61215-2:2018. This Standard has been developed in compliance with Standards Council of Canada requirements for National Standards of Canada. It has been published as a National Standard of Canada by CSA Group. Scope and object This part of IEC 61215 lays down IEC requirements for the design qualification and type approval of terrestrial photovoltaic modules suitable for long-term operation in general open-air climates, as defined in IEC 60721-2-1. This document is intended to apply to all thin-film amorphous silicon (a-Si; a-Si/μc-Si) based terrestrial flat plate modules. As such, it addresses special requirements for testing of this technology supplementing IEC 61215-1:2016 and IEC 61215-2:2016 requirements for testing. This document does not apply to modules used with concentrated sunlight although it may be utilized for low concentrator modules (1 to 3 suns). For low concentration modules, all tests are performed using the current, voltage and power levels expected at the design concentration. The object of this test sequence is to determine the electrical and thermal characteristics of the module and to show, as far as possible within reasonable constraints of cost and time, that the module is capable of withstanding prolonged exposure in climates described in the scope. The actual lifetime expectancy of modules so qualified will depend on their design, their environment and the conditions under which they are operated. This document defines PV technology dependent modifications to the testing procedures and requirements per IEC 61215-1:2016 and IEC 61215-2:2016. ------------------------------------------------------------------------------------------------------------------------------- Pr?face CSA Ce document constitue la premi?re ?dition de CAN/CSA-IEC 61215-1-3, Modules photovolta?ques (PV) pour applications terrestres ? Qualification de la conception et homologation ? Partie 1-3 : Exigences particuli?res d'essai des modules photovolta?ques (PV) au silicium amorphe ? couches minces. Il s’agit de l’adoption, sans modification, de la norme IEC (Commission ?lectrotechnique Internationale) 61215-1-3 (premi?re ?dition, 2016-12) qui porte le m?me titre. Il remplace CAN/CSA-IEC 61646:10, Modules photovolta?ques (PV) en couches minces pour application terrestre ? Qualification de la conception et homologation (norme IEC 61646:2008 adopt?e). Par souci de bri?vet?, tout au long de ce document, il sera appel? ? CAN/CSA-IEC 61215-1-3 ?. Cette norme est con?ue pour ?tre utilis?e de concert avec CAN/CSA-IEC 61215-1:18, Modules photovolta?ques (PV) pour applications terrestres ? Qualification de la conception et homologation ? Partie 1 : Exigences d’essai (norme IEC 61215-1:2016 adopt?e) et CAN/CSA-IEC 61215-2:18, Modules photovolta?ques (PV) pour applications terrestres ?Qualification de la conception et homologation ? Partie 2 : Proc?dures d'essai (norme IEC 61215-2:2016 adopt?e). Cette norme ?nonce des exigences sur la qualification de la conception et l'homologation des modules photovolta?ques (PV) pour applications terrestres et pour une utilisation de longue dur?e dans les grandes zones climatiques ? l’air libre, telles qu'elles sont d?finis dans IEC 60721-2-1:2013, Classification des conditions d’environnement ? Partie 2-1 : Conditions d’environnement pr?sentes dans la nature ? Temp?rature et humidit?. Cette norme est destin? ? s'appliquer ? tous les modules ? plaque plane au silicium amorphe (a-Si; a-Si/μc-Si) ? couches minces pour applications terrestres. A ce titre, il sp?cifie des exigences d'essai particuli?res ? cette technologie en compl?ment des exigences d'essai donn?es dans CAN/CSA-IEC 61215-1:18 et CAN/CSA-IEC 61215-2:18. Cette norme d?finit les modifications d?pendantes de la technologie photovolta?que, apport?es aux exigences et proc?dures d'essai de CAN/CSA-IEC 61215-1:18 et de CAN/CSA-IEC 61215-2:18. Cette norme a ?t? ?labor?e conform?ment aux exigences du Conseil canadien des normes concernant les Normes nationales du Canada. Cette norme a ?t? publi?e en tant que Norme nationale du Canada par Groupe CSA. Domaine d'application et objet La pr?sente partie de l'IEC 61215 ?tablit les exigences de l'IEC pour la qualification de la conception et l'homologation des modules photovolta?ques (PV) pour applications terrestres et pour une utilisation de longue dur?e dans les grandes zones climatiques ? l'air libre, telles qu'elles sont d?finies dans l'IEC 60721-2-1. Le pr?sent document est destin? ? s'appliquer ? tous les modules ? plaque plane au silicium amorphe (a-Si; a-Si/μc-Si) ? couches minces pour applications terrestres. A ce titre, il sp?cifie des exigences d'essai particuli?res ? cette technologie en compl?ment des exigences d'essai donn?es dans l'IEC 61215-1:2016 et l'IEC 61215-2:2016. Le pr?sent document ne s'applique pas aux modules utilis?s avec un ensoleillement intense, m?me s'il peut ?tre utilis?e pour les modules ? faible concentration (ensoleillement 1 ? 3). Pour les modules ? faible concentration, tous les essais sont r?alis?s en utilisant les niveaux de courant, de tension et de puissance pr?vus ? la concentration th?orique. L'objet de cette s?quence d'essais est de d?terminer les caract?ristiques ?lectriques et thermiques du module et de montrer, dans la mesure du possible avec des contraintes raisonnables de co?t et de temps, que le module est apte ? supporter une exposition prolong?e aux climats d?finis dans le domaine d'application. La dur?e de vie r?elle des modules ainsi qualifi?s d?pendra de leur conception, ainsi que de l'environnement et des conditions de fonctionnement. Le pr?sent document d?finit les modifications d?pendantes de la technologie photovolta?que, apport?es aux exigences et proc?dures d'essai de l'IEC 61215-1:2016 et de l'IEC 61215-2:2016. |
| 국제분류(ICS)코드 | |
| 페이지수 | 39 |
| Edition |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | IEC 61215-1-3:2021/AMD1:2022 | Amendment 1 - Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-3: Special requirements for testing of thin-film amorphous silicon based photovoltaic (PV) modules | 2022-03-28 | 표준 |
| 2 | IEC 61215-1-3:2021+AMD1:2022 CSV | Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-3: Special requirements for testing of thin-film amorphous silicon based photovoltaic (PV) modules | 2022-03-28 | 표준 |
| 3 | IEC 61215-1-3:2021 | Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-3: Special requirements for testing of thin-film amorphous silicon based photovoltaic (PV) modules | 2021-02-23 | 표준 |
| 4 | IEC 61215-1-3:2021 RLV | Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-3: Special requirements for testing of thin-film amorphous silicon based photovoltaic (PV) modules | 2021-02-23 | 표준 |
| 5 | CAN/CSA-IEC 61215-1-3:18 (R2023) | Terrestrial photovoltaic (PV) modules — Design qualification and type approval — Part 1-3: Special requirements for testing of thin-film amorphous silicon based photovoltaic (PV) modules (Adopted IEC 61215-1-3:2016, first edition, 2016-12) | Modules photo | 2018-01-01 | 표준 |
| 6 | IEC 61215-1-3:2016 | Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-3: Special requirements for testing of thin-film amorphous silicon based photovoltaic (PV) modules | 2016-12-07 | 구판 |
CAN/CSA-IEC 61215-1-1:18 (R2023) - Terrestrial photovoltaic (PV) modules — Design qualification and type approval — Part 1-1: Special requirements for testing of crystalline silicon photovoltaic (PV) modules (Adopted IEC 61215-1-1:2016, first edition, 2016-03) | Modules photovoltaïques (PV 상세보기
CAN/CSA-IEC 61215-1-2:18 (R2023) - Terrestrial photovoltaic (PV) modules — Design qualification and type approval — Part 1-2: Special requirements for testing of thin-film Cadmium Telluride (CdTe) based photovoltaic (PV) modules (Adopted IEC 61215-1:2016, first edition, 2016-12) | Modules 상세보기
CAN/CSA-IEC 61215-1-4:18 (R2023) - Terrestrial photovoltaic (PV) modules — Design qualification and type approval — Part 1-4: Special requirements for testing of thin-film Cu(In,Ga)(S,Se)2 based photovoltaic (PV) modules (Adopted IEC 61215-1-4:2016, first edition, 2016-12) | Modules photov 상세보기
CAN/CSA-IEC 61215-1:18 (R2023) - Terrestrial photovoltaic (PV) modules — Design qualification and type approval — Part 1: Test requirements (Adopted IEC 61215-1:2016, first edition, 2016-03) | Modules photovoltaïques (PV) pour applications terrestres — Qualification de la conception et h 상세보기
CAN/CSA-IEC 61215-2:18 (R2023) - Terrestrial photovoltaic (PV) modules — Design qualification and type approval — Part 2: Test procedures (Adopted IEC 61215-2:2016, first edition, 2016-03) | Modules photovoltaïques (PV) pour applications terrestres — Qualification de la conception et hom 상세보기
함께 구입한 상품이 존재하지 않습니다.
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
