관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
표준
판매
Electromagnetic compatibility (EMC) — Part 4-16: Testing and measurement techniques — Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz (Adopted IEC 61000-4-16:2015, second edition, 2015-12) | Compatibilité él
| 분야 | 11 : LG Electronics |
|---|---|
| 적용범위 | Preface This is the second edition of CAN/CSA-IEC 61000-4-16, Electromagnetic compatibility (EMC) - Part 4-16: Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz, which is an adoption without modification of the identically titled IEC (International Electrotechnical Commission) Standard 61000-4-16 (second edition, 2015-12). It supersedes the previous edition published in 2002 as CAN/CSA-CEI/IEC 61000-4-16 (adopted IEC 61000-4-16:1998).? Scope This part of IEC 61000 relates to the immunity requirements and test methods for electrical and electronic equipment to conducted, common mode disturbances in the range d.c. to 150 kHz.? The object of this standard is to establish a common and reproducible basis for testing electrical and electronic equipment with the application of common mode disturbances to power supply, control, signal and communication ports.? This Standard defines? ? test voltage and current waveform;? range of test levels;? test equipment;? test set-up;? test procedures.? For some types of ports, for example ports intended to be used with highly balanced lines, additional test provisions may be established by product committee specifications.? The test is intended to demonstrate the immunity of electrical and electronic equipment when subjected to conducted, common mode disturbances such as those originating from power line currents and return leakage currents in the earthing/grounding system.? The disturbances produced by 400 Hz mains systems are not included in the scope of this standard.? Actual interference due to these disturbance phenomena is relatively rare, except in industrial plants. Product committees should therefore consider whether there is a justification for applying this standard in their product/product family standards (see also Clause 4).? This test is not relevant for equipment ports intended to be connected to short cables, having a length less than 20 m or less.? The immunity to harmonics and interharmonics, including mains signalling, on a.c. power ports (in differential mode) is not included in the scope of this standard and is covered by IEC 61000-4-13 and IEC 61000-4-19.? The immunity to conducted disturbances generated by intentional radio-frequency transmitters is not included in the scope of this standard and is covered by IEC 61000-4-6.? ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Pr?face Ce document constitue la deuxi?me ?dition de la CAN/CSA-IEC 61000-4-16, Compatibilit? ?lectromagn?tique (CEM) - Partie 4-16 : Techniques d'essai et de mesure - Essai d'immunit? aux perturbations conduites en mode commun dans la plage de fr?quences de 0 Hz ? 150 kHz. II s'agit de l'adoption, sans modifications, de la norme IEC (Commission ?lectrotechnique Internationale) 61000-4-16 (deuxi?me ?dition, 2015-12) qui porte le m?me titre. Cette norme remplace l'?dition ant?rieure publi?e en 2002 qui portait la d?signation CAN/CSA-CEI/IEC 61000-4-16 (norme IEC 61000-4-16:1998 adopt?e).? Domaine d'application La pr?sente partie de l'IEC 61000 traite des exigences en mati?re d'immunit? et des m?thodes d'essai relatives aux ?quipements ?lectriques et ?lectroniques soumis ? des perturbations conduites en mode commun dans la plage du courant continu ? 150 kHz.? L'objet de la pr?sente Norme est d'?tablir une base commune et reproductible destin?e ? soumettre ? essai les performances des ?quipements ?lectriques et ?lectroniques lorsque ceux-ci sont soumis ? des perturbations conduites en mode commun, appliqu?es aux acc?s d'alimentation, de commande, de signal et de communication.? La pr?sente Norme d?finit? ? la tension d'essai et la forme d'onde du courant;? les plages de niveaux d'essai;? l'?quipement d'essai;? le montage d'essai;? les modes op?ratoires d'essais.? Pour certains types d'acc?s, concernant, par exemple, des acc?s pr?vus pour ?tre utilis?s avec des lignes fortement sym?triques, des dispositions d'essais suppl?mentaires peuvent ?tre d?finies dans les sp?cifications des comit?s de produit.? L'essai vise ? d?montrer l'immunit? des ?quipements ?lectriques et ?lectroniques soumis ? des perturbations conduites en mode commun telles que celles provenant des courants de lignes d'alimentation et des retours de courants de fuite dans les dispositifs de mise ? la terre/? la masse.? Les perturbations dues au r?seau 400 Hz ne font pas partie du domaine d'application de la pr?sente Norme.? De r?elles interf?rences dues ? ces ph?nom?nes de perturbations sont relativement rares, except? dans les installations industrielles. Il convient donc que les comit?s de produit ?tudient si l'application de la pr?sente Norme ? leurs normes de produit/famille de produits est justifi?e (voir aussi l'Article 4).? Cet essai n'est pas pertinent pour les acc?s d'?quipements destin?s ? ?tre raccord?s ? des c?bles courts (20 m au maximum).? L'immunit? aux harmoniques et interharmoniques, y compris les signaux transmis sur le r?seau, sur les acc?s d'alimentation en courant alternatif (en mode diff?rentiel) ne fait pas partie du domaine d'application de la pr?sente Norme, mais est trait?e par l'IEC 61000-4-13 et l'IEC 61000-4-19.? L'immunit? aux perturbations conduites provenant d'?metteurs radio?lectriques intentionnels ne fait pas partie du domaine d'application de la pr?sente Norme, mais est trait?e par l'IEC 61000-4-6. ? |
| 국제분류(ICS)코드 | |
| 페이지수 | 81 |
| Edition |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | CSA IEC 61000-4-16:17 (R2022) | Electromagnetic compatibility (EMC) — Part 4-16: Testing and measurement techniques — Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz (Adopted IEC 61000-4-16:2015, second edition, 2015-12) | Compatibilité él | 2017-01-01 | 표준 |
| 2 | IEC 61000-4-16:2015 | Electromagnetic compatibility (EMC) - Part 4-16: Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz | 2015-12-09 | 표준 |
| 3 | IEC 61000-4-16:2015 RLV | Electromagnetic compatibility (EMC) - Part 4-16: Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz | 2015-12-09 | 표준 |
| 4 | IEC 61000-4-16:1998+AMD1:2001+AMD2:2009 CSV | Electromagnetic compatibility (EMC) - Part 4-16: Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz | 2011-05-11 | 구판 |
| 5 | IEC 61000-4-16:1998/AMD2:2009 | Amendment 2 - Electromagnetic compatibility (EMC) - Part 4-16: Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz | 2009-07-30 | 구판 |
| 6 | IEC 61000-4-16:1998+AMD1:2001 CSV | Electromagnetic compatibility (EMC) - Part 4-16: Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz | 2002-07-12 | 구판 |
| 7 | IEC 61000-4-16:1998/AMD1:2001 | Amendment 1 - Electromagnetic compatibility (EMC) - Part 4-16: Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz | 2001-07-11 | 구판 |
| 8 | IEC 61000-4-16:1998 | Electromagnetic compatibility (EMC) - Part 4-16: Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz | 1998-01-30 | 구판 |
IEC TR 61000-2-1:1990 - Electromagnetic compatibility (EMC) - Part 2: Environment - Section 1: Description of the environment - Electromagnetic environment for low-frequency conducted disturbances and signalling in public power supply systems 상세보기
IEC TR 61000-2-3:1992 - Electromagnetic compatibility (EMC) - Part 2: Environment - Section 3: Description of the environment - Radiated and non-network-frequency-related conducted phenomena 상세보기
IEC 61000-4-12:1995 - Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section 12: Oscillatory waves immunity test. Basic EMC Publication 상세보기
IEC TR 61000-2-6:1995 - Electromagnetic compatibility (EMC) - Part 2: Environment - Section 6: Assessment of the emission levels in the power supply of industrial plants as regards low-frequency conducted disturbances 상세보기
IEC 61000-5-5:1996 - Electromagnetic compatibility (EMC) - Part 5: Installation and mitigation guidelines - Section 5: Specification of protective devices for HEMP conducted disturbance. Basic EMC Publication 상세보기
함께 구입한 상품이 존재하지 않습니다.
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
