관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
표준
판매
Energy performance of large battery charger systems
| 분야 | |
|---|---|
| 적용범위 | Preface This is the first edition of CSA C812, Energy performance of large battery charger systems. This Standard specifies the test method for measuring and reporting the energy consumption of large battery charger systems. This Standard has been harmonized with the requirements for testing and evaluating the energy consumption of large battery charger systems specified in the California Energy Commission Appliance Efficiency Regulations, CEC-400-2014-009, which refers to Energy Efficiency Battery Charger System Test Procedure, Version 2.2, dated November 12, 2008, published by ECOS and EPRI Solutions. CSA Group acknowledges that the development of this Standard was made possible, in part, by the financial support of Natural Resources Canada, B.C. Hydro, Manitoba Hydro, Hydro Quebec, Ontario Ministry of Energy, Canadian Electricity Association, Independent Electricity System Operator, and Nova Scotia Energy. Scope 1.1 This Standard specifies the test method for measuring and reporting the energy performance of large battery charger systems. Note: This Standard is technology neutral. 1.2 This Standard applies to large battery charger systems such as forklifts, autoettes, electric personal assistive mobility devices, and low speed vehicles that are battery charger systems with a rated input power of more than 2 kW, except those a) used to charge a motor vehicle that is powered by an electric motor drawing current from rechargeable storage batteries, fuel cells, or other portable sources of electrical current, and which may include a nonelectrical source of power designed to charge batteries and components thereof; b) used to charge a battery or batteries in an illuminated exit sign; c) with input that is three phase of line-to-line 300 volts root mean square (rms) or more and is designed for a stationary power application; d) that are battery analyzers; e) that are uninterruptible power systems as defined by IEC 62040-3; or f) that are for golf carts. 1.3 In this Standard, "shall" is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; "should" is used to express a recommendation or that which is advised but not required; and "may" is used to express an option or that which is permissible within the limits of the standard. Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material. Notes to tables and figures are considered part of the table or and may be written as requirements. Annexes are designated normative (mandatory) or informative (non-mandatory) to define their application. 1.4 The values given in SI units are the units of record for the purposes of this Standard. The values given in parentheses are for information and comparison only. ? |
| 국제분류(ICS)코드 | |
| 페이지수 | 26 |
| Edition |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | CSA C812:16 (R2020) | Energy performance of large battery charger systems | 2016-01-01 | 표준 |
관련상품이 존재하지 않습니다.
SAE J3193_202104 - Fuel Cell Vehicle Thermal Management 상세보기
ISO/TR 11954:2008 - Fuel cell road vehicles — Maximum speed measurement 상세보기
ISO 20474-12:2017 - Earth-moving machinery — Safety — Part 12: Requirements for cable excavators 상세보기
SAE AMS3279D - Sealing Compound, Sprayable For Integral Fuel Tanks and Fuel Cell Cavities, For Intermittent Use to 350 °F (177 °C) (Stabilized: Mar 2013) 상세보기
SAE AMSS83318D - Sealing Compound, Polysulfide Type, Low Temperature Curing, Quick Repair, Integral Fuel Tanks and Fuel Cell Cavities (Stabilized: Nov 2021) 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
