관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
표준
판매
Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radiofrequency fields (Adopted IEC 61000-4-6:2013, fourth edition, 2013-10) | Compatibilité électromagnétique (CEM) - Parti
| 분야 | 11 : LG Electronics |
|---|---|
| 적용범위 | CSA Preface This is the third edition of CAN/CSA-IEC 61000-4-6, Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radiofrequency fields, which is an adoption without modification of the identically titled IEC (International Electrotechnical Commission) Standard 61000-4-6 (fourth edition, 2013-10). It supersedes the previous edition published in 2009 as CAN/CSA-C61000-4-6 (adopted IEC 61000-4-6:2003+A1:2004+A2:2006). Scope This part of IEC 61000 relates to the conducted immunity requirements of electrical and electronic equipment to electromagnetic disturbances coming from intended radio-frequency (RF) transmitters in the frequency range 150 kHz up to 80 MHz. Equipment not having at least one conducting wire and/or cable (such as mains supply, signal line or earth connection) which can couple the equipment to the disturbing RF fields is excluded from the scope of this publication. NOTE 1 Test methods are defined in this part of IEC 61000 to assess the effect that conducted disturbing signals, induced by electromagnetic radiation, have on the equipment concerned. The simulation and measurement of these conducted disturbances are not adequately exact for the quantitative determination of effects. The test methods defined are structured for the primary objective of establishing adequate repeatability of results at various facilities for quantitative analysis of effects. The object of this standard is to establish a common reference for evaluating the functional immunity of electrical and electronic equipment when subjected to conducted disturbances induced by RF fields. The test method documented in this part of IEC 61000 describes a consistent method to assess the immunity of an equipment or system against a defined phenomenon. NOTE 2 As described in IEC Guide 107, this standard is a basic EMC publication for use by product committees of the IEC. As also stated in Guide 107, the IEC product committees are responsible for determining whether this immunity test standard should be applied or not, and if applied, they are responsible for determining the appropriate test levels and performance criteria. ---------------------------------------------------------------------------------- Pr?face CSA Ce document constitue la troisi?me ?dition de la CAN/CSA-IEC 61000-4-6, Compatibilit? ?lectromagn?tique (CEM) - Partie 4-6 : Techniques d'essai et de mesure - Immunit? aux perturbations conduites, induites par les champs radio?lectriques. Il s'agit de l'adoption, sans modifications, de la norme IEC Commission ?lectrotechnique Internationale) 61000-4-6 (quatri?me ?dition, 2013-10) qui porte le m?me titre. Cette norme remplace l'?dition ant?rieure publi?e en 2009 qui portait la d?signation CAN/CSA-C61000-4-6 (norme IEC 61000-4-:2003+A1:2004+A2:2006 adopt?e). Domaine d'application La pr?sente partie de la CEI 61000 se rapporte aux exigences relatives ? l'immunit? en conduction des mat?riels ?lectriques et ?lectroniques aux perturbations ?lectromagn?tiques provoqu?es par des ?metteurs destin?s ? des radiofr?quences (RF), dans la gamme de fr?quences de 150 kHz ? 80 MHz. Les mat?riels n'ayant pas au moins un c?ble conducteur (par exemple, cordons d'alimentation, lignes de transmission de signaux ou connexions de mise ? la terre) capable de coupler les mat?riels aux champs RF perturbateurs ne sont pas concern?s par la pr?sente norme. NOTE 1 Les m?thodes d'essai sont d?finies dans la pr?sente partie de la CEI 61000 pour mesurer l'effet que les signaux perturbateurs conduits, induits par le rayonnement ?lectromagn?tique, ont sur l'?quipement concern?. La simulation et la mesure de ces perturbations conduites ne sont pas parfaitement exactes pour la d?termination quantitative des effets. Les m?thodes d'essai d?finies sont structur?es dans le but principal d'?tablir une bonne reproductibilit? des r?sultats dans des installations diff?rentes en vue de l'analyse quantitative des effets. L'objet de la pr?sente norme est d'?tablir une r?f?rence commune dans le but d'?valuer l'immunit? fonctionnelle des mat?riels ?lectriques et ?lectroniques, quand ils sont soumis aux perturbations conduites induites par les champs radiofr?quence. La m?thode d'essai document?e dans cette partie de la CEI 61000, d?crit une m?thode coh?rente dans le but d'?valuer l'immunit? d'un mat?riel ou d'un syst?me vis-?-vis d'un ph?nom?ne d?fini. NOTE 2 Comme d?crit dans le Guide 107 de la CEI, la pr?sente norme est une publication fondamentale en CEM destin?e ? ?tre utilis?e par les comit?s de produits de la CEI. Comme indiqu? ?galement dans le Guide 107, il incombe aux comit?s de produits de la CEI de d?terminer s'il convient d'appliquer ou non la pr?sente Norme d'essai d'immunit?, et si tel est le cas, ils ont la responsabilit? de d?terminer les niveaux d'essai et les crit?res de performance appropri?s. |
| 국제분류(ICS)코드 | |
| 페이지수 | 196 |
| Edition |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | IEC 61000-4-6:2023 | Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields | 2023-06-06 | 표준 |
| 2 | IEC 61000-4-6:2023 RLV | Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields | 2023-06-06 | 표준 |
| 3 | IEC 61000-4-6:2013/COR1:2015 | Corrigendum 1 - Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields | 2015-06-12 | 구판 |
| 4 | CAN/CSA-IEC 61000-4-6:15 (R2023) | Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radiofrequency fields (Adopted IEC 61000-4-6:2013, fourth edition, 2013-10) | Compatibilité électromagnétique (CEM) - Parti | 2015-01-01 | 표준 |
| 5 | IEC 61000-4-6:2013 | Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields | 2013-10-23 | 구판 |
| 6 | IEC 61000-4-6:2008 | Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields | 2008-10-31 | 구판 |
| 7 | IEC 61000-4-6:2008 RLV | Electromagnetic compatibility (EMC) – Part 4-6: Testing and measurement techniques – Immunity to conducted disturbances, induced by radio-frequency fields | 2008-10-01 | 구판 |
| 8 | IEC 61000-4-6:2003+AMD1:2004+AMD2:2006 CSV | Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields | 2006-05-22 | 구판 |
| 9 | IEC 61000-4-6:2003/AMD2:2006 | Amendment 2 - Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields | 2006-03-20 | 구판 |
| 10 | IEC 61000-4-6:2003+AMD1:2004 CSV | Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields | 2004-11-24 | 구판 |
| 11 | IEC 61000-4-6:2003/AMD1:2004 | Amendment 1 - Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields | 2004-10-12 | 구판 |
| 12 | IEC 61000-4-6:2003 | Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields | 2003-05-27 | 구판 |
| 13 | IEC 61000-4-6:1996+AMD1:2000 CSV | Electromagnetic compatibility (EMC)- Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields | 2001-04-26 | 구판 |
| 14 | IEC 61000-4-6:1996/AMD1:2000 | Amendment 1 - Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section 6: Immunity to conducted disturbances, induced by radio-frequency fields | 2000-11-09 | 구판 |
| 15 | IEC 61000-4-6:1996/COR1:1996 | Corrigendum to IEC 1000-4-6 | 1996-10-17 | 구판 |
| 16 | IEC 61000-4-6:1996 | Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section 6: Immunity to conducted disturbances, induced by radio-frequency fields | 1996-04-04 | 구판 |
IEC TR 61000-2-1:1990 - Electromagnetic compatibility (EMC) - Part 2: Environment - Section 1: Description of the environment - Electromagnetic environment for low-frequency conducted disturbances and signalling in public power supply systems 상세보기
IEC TR 61000-2-3:1992 - Electromagnetic compatibility (EMC) - Part 2: Environment - Section 3: Description of the environment - Radiated and non-network-frequency-related conducted phenomena 상세보기
IEC 61000-4-12:1995 - Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section 12: Oscillatory waves immunity test. Basic EMC Publication 상세보기
IEC TR 61000-2-6:1995 - Electromagnetic compatibility (EMC) - Part 2: Environment - Section 6: Assessment of the emission levels in the power supply of industrial plants as regards low-frequency conducted disturbances 상세보기
IEC 61000-5-5:1996 - Electromagnetic compatibility (EMC) - Part 5: Installation and mitigation guidelines - Section 5: Specification of protective devices for HEMP conducted disturbance. Basic EMC Publication 상세보기
함께 구입한 상품이 존재하지 않습니다.
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
