관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
표준
판매
Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test (Adopted IEC 61000-4-5:2005, second edition, 2005-11) | Compatibilité électromagnétique (CEM) - Partie 4-5: Techniques d'essai et de mesure - Essai d'
| 분야 | 11 : LG Electronics |
|---|---|
| 적용범위 | Preface This is the second edition of CAN/CSA-IEC 61000-4-5, Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test, which is an adoption without modification of the identically titled IEC (International Electrotechnical Commission) Standard 61000-4-5 (second edition, 2005-11). It supersedes the first edition published in 2001 as CAN/CSA-CEI/IEC 61000-4-5 (adopted CEI/IEC 1000-4-5:1995). Scope and object This part of IEC 61000 relates to the immunity requirements, test methods, and range of recommended test levels for equipment to unidirectional surges caused by overvoltages from switching and lightning transients. Several test levels are defined which relate to different environment and installation conditions. These requirements are developed for and are applicable to electrical and electronic equipment. The object of this standard is to establish a common reference for evaluating the immunity of electrical and electronic equipment when subjected to surges. The test method documented in this part of IEC 61000 describes a consistent method to assess the immunity of an equipment or system against a defined phenomenon. NOTE As described in IEC Guide 107, this is a basic EMC publication for use by product committees of the IEC. As also stated in Guide 107, the IEC product committees are responsible for determining whether this immunity test standard should be applied or not, and if applied, they are responsible for determining the appropriate test levels and performance criteria. TC 77 and its sub-committees are prepared to co-operate with product committees in the evaluation of the value of particular immunity tests for their products. This Standard defines: ? a range of test levels test equipment test setups test procedures. The task of the described laboratory test is to find the reaction of the EUT under specified operational conditions, to surge voltages caused by switching and lightning effects at certain threat levels. It is not intended to test the capability of the EUT's insulation to withstand high-voltage stress. Direct injections of lightning currents, i.e, direct lightning strikes, are not considered in this standard. -------------------------------------------------------------------------------- Pr?face? Ce document constitue la deuxi?me ?dition de la CAN/CSA-IEC 61000-4-5, Compatibilit? ?lectromagn?tique (CEM) - Partie 4-5 : Techniques d'essai et de mesure - Essai d'immunit? aux ondes de choc. Il s'agit de l'adoption, sans modifications, de la norme CEI (Commission ?lectrotechnique Internationale) 61000-4-5 (deuxi?me ?dition, 2005-11), qui port le m?me titre. Cette norme remplace la premi?re ?dition publi?e en 2001 qui portait la d?signation CAN/CSA-CEI/IEC 61000-4-5 (norme CEI/IEC 1000-4-5:1995 adopt?e). Domaine d’application et objet La pr?sente partie de la CEI 61000 se rapporte aux exigences d'immunit? pour les mat?riels, aux m?thodes d'essai et ? la gamme des niveaux d'essai recommand?s, vis-?-vis des ondes de choc unidirectionnelles provoqu?es par des surtensions dues aux transitoires de foudre et de manoeuvres. Elle d?finit plusieurs niveaux d'essai se rapportant ? diff?rentes conditions d'environnement et d'installation. Ces exigences sont d?velopp?es pour les mat?riels ?lectrique et ?lectronique et leur sont applicables. Cette norme a pour objet d'?tablir une r?f?rence commune dans le but d'?valuer l'immunit? des mat?riels ?lectriques et ?lectroniques, quand ils sont soumis ? des ondes de choc. La m?thode d'essai document?e dans cette partie de la CEI 61000 d?crit une m?thode logique en vue d'?valuer l'immunit? d'un ?quipement ou d'un syst?me vis-?-vis d'un ph?nom?ne donn?. NOTE Comme d?crit dans le Guide 107 de la CEI, c'est une publication fondamentale en CEM pour utilisation par les comit?s de produits de la CEI. Comme indiqu? ?galement dans le Guide 107, les comit?s de produits de la CEI sont responsables de d?terminer s'il convient d'appliquer ou non cette norme d'essai d'immunit? et, si c'est le cas, ils sont responsables de d?terminer les niveaux d'essai et les crit?res de performance appropri?s. Le comit? d'?tudes 77 et ses sous-comit?s sont pr?ts ? coop?rer avec les comit?s de produits ? l'?valuation de la valeur des essais d'immunit? particuliers pour leurs produits. Cette norme d?finit : ? une gamme de niveaux d'essai le mat?riel d'essai les montages d'essai les proc?dures d'essai L'essai de laboratoire d?crit ici a pour but de d?terminer la r?action de l'EST, dans des conditions op?rationnelles sp?cifi?es, aux surtensions d'origine atmosph?rique ou dues ? des manoeuvres, pour certains niveaux de menace. Il n'est pas destin? ? ?valuer la capacit? de l'isolation ? supporter des tensions ?lev?es. Les injections directes de courants de foudre, par exemple les coups de foudre directs, ne sont pas prises en compte par cette norme. |
| 국제분류(ICS)코드 | |
| 페이지수 | 119 |
| Edition |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | IEC 61000-4-5:2014/AMD1:2017 | Amendment 1 - Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test | 2017-08-04 | 표준 |
| 2 | IEC 61000-4-5:2014+AMD1:2017 CSV | Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test | 2017-08-04 | 표준 |
| 3 | IEC 61000-4-5:2014 | Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test | 2014-05-15 | 표준 |
| 4 | IEC 61000-4-5:2005/COR1:2009 | Corrigendum 1 - Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test | 2009-10-20 | 구판 |
| 5 | CAN/CSA-IEC 61000-4-5:08 (R2022) | Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test (Adopted IEC 61000-4-5:2005, second edition, 2005-11) | Compatibilité électromagnétique (CEM) - Partie 4-5: Techniques d'essai et de mesure - Essai d' | 2008-01-01 | 표준 |
| 6 | IEC 61000-4-5:2005 | Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test | 2005-11-29 | 구판 |
| 7 | IEC 61000-4-5:1995+AMD1:2000 CSV | Electromagnetic compatibility (EMC)- Part 4-5: Testing and measurement techniques - Surge immunity test | 2001-04-26 | 구판 |
| 8 | IEC 61000-4-5:1995/AMD1:2000 | Amendment 1 - Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section 5: Surge immunity test | 2000-11-09 | 구판 |
| 9 | IEC 61000-4-5:1995/COR1:1995 | Corrigendum 1 - Electromagnetic compatibility (EMC)- Part 4-5: Testing and measurement techniques - Surge immunity test | 1995-03-01 | 구판 |
| 10 | IEC 61000-4-5:1995 | Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section 5: Surge immunity test | 1995-02-01 | 구판 |
IEC TR 61000-2-1:1990 - Electromagnetic compatibility (EMC) - Part 2: Environment - Section 1: Description of the environment - Electromagnetic environment for low-frequency conducted disturbances and signalling in public power supply systems 상세보기
IEC TR 61000-2-3:1992 - Electromagnetic compatibility (EMC) - Part 2: Environment - Section 3: Description of the environment - Radiated and non-network-frequency-related conducted phenomena 상세보기
IEC 61000-4-12:1995 - Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section 12: Oscillatory waves immunity test. Basic EMC Publication 상세보기
IEC TR 61000-2-6:1995 - Electromagnetic compatibility (EMC) - Part 2: Environment - Section 6: Assessment of the emission levels in the power supply of industrial plants as regards low-frequency conducted disturbances 상세보기
IEC 61000-5-5:1996 - Electromagnetic compatibility (EMC) - Part 5: Installation and mitigation guidelines - Section 5: Specification of protective devices for HEMP conducted disturbance. Basic EMC Publication 상세보기
함께 구입한 상품이 존재하지 않습니다.
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
