관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
표준
판매
Rigid types EB1 and DB2/ES2 PVC conduit
| 분야 | 11 : LG Electronics |
|---|---|
| 적용범위 | Preface This is the third edition of CSA C22.2 No. 211.1, Rigid types EB1 and DB2/ES2 PVC conduit, one of a series of Standards issued by the Canadian Standards Association under Part II of the Canadian Electrical Code. It supersedes the previous editions published in 1984 and 1983. This edition includes the following additions: (a) metric designators for trade sizes; (b) requirements for use of PVC industrial scrap; and (c) requirements for multi-layer conduit.? Scope 1.1 This Standard applies to rigid PVC conduit - type EB1 for encasement in concrete or masonry and type DB2/ES2 for direct burial or encasement in concrete or masonry - and associated fittings in accordance with the Rules of the Canadian Electrical Code, Part I, for ordinary locations.? 1.2 The conduits and associated fittings covered by this Standard are intended for a maximum continuous operating temperature of 75 °C.? 1.3 The accessories covered by this Standard include straight couplings, 5° angle couplings, caps, plugs, bell end terminators, bends, and adapters.? 1.4 In CSA Standards, "shall" is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; "should" is used to express a recommendation or that which is advised but not required; "may" is used to express an option or that which is permissible within the limits of the standard; and "can" is used to express possibility or capability. Note - accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material. Note - to tables and figures are considered part of the table or figure and may be written as requirements. Annexes are designated normative (mandatory) or informative (non-mandatory) to define their application. |
| 국제분류(ICS)코드 | |
| 페이지수 | 28 |
| Edition |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | CSA C22.2 NO. 211.1:06 (R2021) | Rigid types EB1 and DB2/ES2 PVC conduit | 2006-01-01 | 표준 |
관련상품이 존재하지 않습니다.
S136-16 (R2021) - North American specification for the design of cold-formed steel structural members 상세보기
CSA C22.2 NO. 62:93 (R2022) - Surface raceway systems 상세보기
CAN/CSA-B311-02 (R2022) - Safety code for manlifts 상세보기
CSA B242:05 (R2021) - Groove- and shoulder-type mechanical pipe couplings 상세보기
CSA C22.2 NO. 0.3:09 (R2023) - Test methods for electrical wires and cables 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
