관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
표준
판매
Information Technology - Telecommunications and Information Exchange Between Systems - Use of X.25 to Provide the OSI Connection-Mode Network Service (Adopted ISO/IEC 8878:1992, second edition, 1992-12-15, including Technical Corrigendum 1:1993 and Techni
| 분야 | |
|---|---|
| 적용범위 | Scope The OSI Connection-mode Network Service (CONS) is defined in terms of a set of primitive actions and events and associated parameters. For a protocol to support this service, there must be a mapping between the abstract primitives and parameters of the CONS and the real elements of the protocol. For the X.25 Packet Layer Protocol (PLP), the main body of this International Standard provides such a mapping for the X.25/PLP-1984 using Virtual Calls. This International Standard alos provides a mapping of the CONS primitives and parameters to the X.25/PLP-1980 plus an SNDCP (Annex A). These mappings apply to the X.25 VC service. In addition, the method of selecting the appropriate mapping, if any, for different combinations of end systems and Network Layer relay systems implementing one or more of the mappings is defined (Annex B). For the PVC service for both the X.25/PLP-1984 and the X.25/PLP- 1980, a mapping of CONS primitives and parameters to the X.25/PLP is given in Annex C. This International Standard specifies two sets of procedures from which three classes of implementation are described. The requirements of these procedures are applicable both to end system operation and to half the operation of a Network Layer r elay. Where relay operation is concerned, the two halves of the relay may be the same or different classes of implementation. This International Standard specifies the requirements to be met by a System-1984 implementation. Implementations in this class are d esigned to operate directly and efficiently with other System-1984 implementations, including cases of operation across an X.25 (1984) subnetwork. This International Standard also specifies the procedures to be operated by a System-1980 implementation. Implementations in this class are designed to operate directly with other System- 1980 implementations, including cases of operation across any form of X.25 subnetwork, but will operate less efficiently than System-1984 implementations. This International Standard also specifies the requirements to be met by a Compatible implementation. Implementations in this class are designed to operate directly with all other implementation classes, including cases of operation across any type of X.25 subnetwork. They make efficient use of X.25(1984) when placed in this environment. The X.25/PLP is usually regarded as operating between an end system (i.e., a "Data Terminal Equipment" in X.25 terminology) and a packet-switched public data subnetwork. However, the X.25/PLP can also be used in other environments to provide the OSI CONS. Examples of such other uses include (a) an end system connected to an X.25 packet-switched private data subnetwork (b) an end system connected to a local area network (c) direct connection or circuit-switched connection (including connection across a circuit-switched data subnetwork) of two end systems without an intervening packet-switched public data subnetwork (d) an end system connected to an Integrated Services Digital Network. ? ? ? |
| 국제분류(ICS)코드 | |
| 페이지수 | 108 |
| Edition |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | ISO/IEC 8878:1992/COR3:1996 | Information technology - Telecommunications and information exchange between systems - Use of X.25 to provide the OSI Connection-mode Network Service - Technical Corrigendum 3 | 1996-03-07 | 표준 |
| 2 | ISO/IEC 8878:1992/Cor 3:1996 | 1996-03-07 | 표준 | |
| 3 | CAN/CSA-ISO/IEC 8878-95 (R2013) | Information Technology - Telecommunications and Information Exchange Between Systems - Use of X.25 to Provide the OSI Connection-Mode Network Service (Adopted ISO/IEC 8878:1992, second edition, 1992-12-15, including Technical Corrigendum 1:1993 and Techni | 1995-01-01 | 표준 |
| 4 | ISO/IEC 8878:1992/COR2:1993 | Information technology - Telecommunications and information exchange between systems - Use of X.25 to provide the OSI Connection-mode Network Service - Technical Corrigendum 2 | 1993-09-16 | 표준 |
| 5 | ISO/IEC 8878:1992/Cor 2:1993 | 1993-09-16 | 표준 | |
| 6 | ISO/IEC 8878:1992/Cor 1:1993 | 1993-05-13 | 표준 | |
| 7 | ISO/IEC 8878:1992/COR1:1993 | Information technology - Telecommunications and information exchange between systems - Use of X.25 to provide the OSI Connection-mode Network Service - Technical Corrigendum 1 | 1993-05-13 | 표준 |
| 8 | ISO/IEC 8878:1992 | Information technology - Telecommunications and information exchange between systems - Use of X.25 to provide the OSI Connection-mode Network Service | 1992-12-30 | 표준 |
| 9 | ISO/IEC 8878:1992 | Information technology — Telecommunications and information exchange between systems — Use of X.25 to provide the OSI Connection-mode Network Service | 1992-12-30 | 표준 |
| 10 | ISO 8878:1987/Amd 3:1991 | Information processing systems — Data communications — Use of X.25 to provide the OSI connection-mode network service — Amendment 3 | 1991-06-20 | 구판 |
| 11 | ISO 8878:1987/Add 1:1990 | Information processing systems — Data communications — Use of X.25 to provide the OSI connection-mode network service — Addendum 1 | 1990-06-20 | 구판 |
| 12 | ISO 8878:1987/Add 2:1990 | Information processing systems — Data communications — Use of X.25 to provide the OSI connection-mode network service — Addendum 2 | 1990-06-20 | 구판 |
관련상품이 존재하지 않습니다.
함께 구입한 상품이 존재하지 않습니다.
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
