관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
표준
판매
Gas Transmission and Distribution Piping Systems
| 분야 | |
|---|---|
| 적용범위 | ASME has been defining piping safety since 1922. ASME B31.8 covers gas transmission and distribution piping systems, including gas pipelines, gas compressor stations, gas metering and regulation stations, gas mains, and service lines up to the outlet of the customer’s meter set assembly. It includes gas transmission and gathering pipelines, including appurtenances that are installed offshore for the purpose of transporting gas from production facilities to onshore locations; gas storage equipment of the closed pipe type that is fabricated or forged from pipe or fabricated from pipe and fittings; and gas storage lines. Key changes to this revision include adding the following: a new section to address fit up requirements for bends and elbows; specific language and/or references to include non-pressurized pipe; guidelines for assembly of flanges; pig trap design safety requirements; the use of Multilayered Reinforced Thermoplastic Piping Systems (MRTPS); and requirements for general monitoring for Abnormal Operating Conditions (AOCs) and decoupling AOCs from covered task qualifications. In addition, the list of approved valve specifications has been expanded. This Code prescribes comprehensive solutions for materials, design, fabrication, assembly, erection, testing and inspection. It also serves as a companion to ASME’s other B31 codes on piping systems. Together, they remain essential references for anyone engaged with piping. Careful application of these B31 codes will help users to comply with applicable regulations within their jurisdictions, while achieving the operational, cost and safety benefits to be gained from the many industry best-practices detailed within these volumes. Intended for manufacturers, users, constructors, designers, pipeline operation and maintenance personnel, and regulatory personnel, plus all potential governing entities. |
| 국제분류(ICS)코드 | |
| 페이지수 | 224 |
| Edition |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | ASME B31.8-2022 | Gas Transmission and Distribution Piping Systems | 2022-12-22 | 표준 |
| 2 | ASME B31.8-2020 | Gas Transmission and Distribution Piping Systems | 2021-05-31 | 구판 |
| 3 | ASME B31.8-2018 | Gas Transmission and Distribution Piping Systems | 2018-01-01 | 구판 |
| 4 | ASME B31.8-2016 | Gas Transmission and Distribution Piping Systems | 2016-01-01 | 구판 |
| 5 | ASME B31.8-2014 | Gas Transmission and Distribution Piping Systems (B31.8 - 2014) | 2014-01-01 | 구판 |
| 6 | ASME B31.8-2012 | Gas Transmission and Distribution Piping Systems (B31.8 - 2012) | 2012-01-01 | 구판 |
| 7 | ASME B31.8-2010 | Gas Transmission and Distribution Piping Systems (B31.8 - 2010) | 2010-01-01 | 구판 |
| 8 | ASME B31.8-2007 | Gas Transmission and Distribution Piping Systems (B31.8 - 2007) | 2007-01-01 | 구판 |
| 9 | ASME B31.8-2003 | Gas Transmission and Distribution Piping Systems (B31.8 - 2003) | 2003-01-01 | 구판 |
관련상품이 존재하지 않습니다.
ASME B16.5-2020 - Pipe Flanges and Flanged Fittings: NPS 1/2 through NPS 24 Metric/Inch Standard 상세보기
ASME B31.1-2022 - Power Piping 상세보기
ASME B16.47-2020 - Large Diameter Steel Flanges: NPS 26 through NPS 60 Metric/Inch Standard 상세보기
ASME B16.1-2020 - Gray Iron Pipe Flanges and Flanged Fittings: Classes 25, 125, and 250 상세보기
ASME B16.34-2020 - Valves--Flanged, Threaded, and Welding End 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
