관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
표준
판매
Steam Turbines in Combined Cycles (PTC 6.2 - 2011)
| 분야 | PTC : Performance Test Code |
|---|---|
| 적용범위 | ASME PTC 6.2 is a performance test code for testing steam turbines in combined cycles with or without supplementary firing and in cogeneration applications. It addresses the testing and calculating of turbine-generator output performance corrected to reference conditions as a measure of overall turbine performance. This Code contains rules and procedures for the conduct and reporting of steam turbine testing, including requirements for pretest arrangements, testing techniques, instrumentation, methods of measurement, and methods for calculating test results and uncertainty. After the success and wide acceptance of the first edition in 2004, the PTC 6.2 Committee embarked on a significant and needed revision. The result is this recently published 2011 edition. This revision accomplishes the following changes: Amplifies the section on degradation thus providing more useful guidance; Provides more guidance on correlated and uncorrelated uncertainty; Addresses stability criteria ? such as off-design limits of pressure and temperature; Adds references to relevant Codes such as PTC 19.5 and PTC 19.6; Complies with PTC 1 and the PTC 1 Template; Provides an expanded Appendix D on the Procedure for Determining N2 Packing Leakage Flow; Revises many recommendations in Section 3 to requirements, i.e., use of shall instead of should. PTC 6 is the appropriate code for testing steam turbines in nuclear and fossil- fired regenerative feed-water heater cycles. It is applicable only to turbines in cycles in which steam is the working fluid. Intended for equipment and systems test engineers, instrument engineers, industrial and power plant engineers, steam turbine manufacturers, instrument manufacturers, A/E firms, and third-party testing agencies. |
| 국제분류(ICS)코드 | |
| 페이지수 | 112 |
| Edition |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | ASME PTC 6.2-2011(R2016) | Steam Turbines in Combined Cycles (PTC 6.2 - 2011) | 2011-01-01 | 표준 |
관련상품이 존재하지 않습니다.
ASME B16.47-2020 - Large Diameter Steel Flanges: NPS 26 through NPS 60 Metric/Inch Standard 상세보기
ASME B16.5-2020 - Pipe Flanges and Flanged Fittings: NPS 1/2 through NPS 24 Metric/Inch Standard 상세보기
ISO 20816-3:2022 - Mechanical vibration — Measurement and evaluation of machine vibration — Part 3: Industrial machinery with a power rating above 15 kW and operating speeds between 120 r/min and 30 000 r/min 상세보기
API STD 630:1961(R1975) - Tube Dimensions for Fired Heaters 상세보기
AGA XQ9212 (1994) - AGA Report No. 8, Compressibility Factor of Natural Gas and Related Hydrocarbon Gases 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
