관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
구판
판매
Process Piping (B31.3 - 2002)
| 분야 | B31 : Piping |
|---|---|
| 적용범위 | There is a newer edition of this document available. Rules for the Process Piping Code have been developed considering piping typically found in petroleum refineries; chemical, pharmaceutical, textile, paper, semiconductor, and cryogenic plants; and related processing plants and terminals. Content and Coverage (a) This Code prescribes requirements for materials and components, design, fabrication, assembly, erection, examination, inspection, and testing of piping. (b) This Code applies to piping for all fluids, including: (1) raw, intermediate, and finished chemicals; (2) petroleum products; (3) gas, steam, air, and water; (4) fluidized solids; (5) refrigerants; and (6) cryogenic fluids. (c) See Fig. 300.1.1 for a diagram illustrating the application of B31.3 piping at equipment. The joint connecting piping to equipment is within the scope of B31.3. Packaged Equipment Piping. Also included within the scope of this Code is piping which interconnects pieces or stages within a packaged equipment assembly. Exclusions. This Code excludes the following: (a) piping systems designed for internal gage pressures at or above zero but less than 105 kPa (15 psi), provided the fluid handled is nonflammable, nontoxic, and not damaging to human tissue as defined in 300.2, and its design temperature is from -29°C (-20°F) through 186°C (366°F); (b) power boilers in accordance with BPV Code2 Section I and boiler external piping which is required to conform to B31.1; (c) tubes, tube headers, crossovers, and manifolds of fired heaters, which are internal to the heater enclosure; and (d) pressure vessels, heat exchangers, pumps, compressors, and other fluid handling or processing equipment, including internal piping and connections for external piping. |
| 국제분류(ICS)코드 | |
| 페이지수 | 344 |
| Edition |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | ASME B31.3-2022 | Process Piping | 2022-01-31 | 표준 |
| 2 | ASME B31.3-2020 | Process Piping | 2021-06-18 | 구판 |
| 3 | ASME B31.3-2018 | Process Piping | 2018-01-01 | 구판 |
| 4 | ASME B31.3-2016 | Process Piping | 2016-01-01 | 구판 |
| 5 | ASME B31.3-2014 | Process Piping (B31.3 - 2014) | 2014-01-01 | 구판 |
| 6 | ASME B31.3-2012 | B31.3 - 2012 Process Piping (B31.3 - 2012) | 2012-01-01 | 구판 |
| 7 | ASME B31.3-2010 | Process Piping (B31.3 - 2010) | 2010-01-01 | 구판 |
| 8 | ASME B31.3-2008 | Process Piping (B31.3 - 2008) | 2008-01-01 | 구판 |
| 9 | ASME B31.3-2006 | Process Piping (B31.3 - 2006) | 2006-01-01 | 구판 |
| 10 | ASME B31.3-2004 | Process Piping (B31.3 - 2004) | 2004-01-01 | 구판 |
| 11 | ASME B31.3-2002 | Process Piping (B31.3 - 2002) | 2002-01-01 | 구판 |
관련상품이 존재하지 않습니다.
함께 구입한 상품이 존재하지 않습니다.
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
