관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
구판
판매
Dryseal Pipe Threads,Inch (B1.20.3 - 1976)
| 분야 | B1 : Screw Threads |
|---|---|
| 적용범위 | Dryseal pipe threads are based on the USA (American) pipe thread, however, they differ from the USA (American) pipe thread in that they are designed to seal pressure-tight joints without the necessity of using sealing compounds. To accomplish this some modification of thread from and greater accuracy in manufacture is required. The roots of both the external and internal threads are truncated slightly more than the crests, i.e. roots have wider flats than crest, so that metal-to-metal contact occurs at the crests and roots coincident with or prior to flank contact, see Figure 1. Thus as the threads are assembled by wrenching, the roots of the threads crush the sharper crests of the mating threads. This sealing action at both the major and minor diameters tends to prevent spiral leakage and makes the joints pressure tight without the necessity of using sealing compounds, provided that the mating threads are in accordance with standard specifications and tolerances and are not damaged by galling in assembly. The control of crest and root truncation is simplified by the use of properly designed threading tools. Also, it is desirable that both external and internal threads have full thread height for the L1 length. However, where not functionally objectionable, the use of a compatible lubricant or sealant may be used to minimize the possibility of galling. This is desirable in assembling Dryseal Pipe Threads in refrigeration and other systems to effect a pressure tight seal. |
| 국제분류(ICS)코드 | |
| 페이지수 | 19 |
| Edition |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | ASME B1.20.3-1976(R2013) | Dryseal Pipe Threads,Inch (B1.20.3 - 1976) | 1976-01-01 | 구판 |
| 2 | ASME B1.20.3-1976(R2018) | Dryseal Pipe Threads,Inch (B1.20.3 - 1976) | 1976-01-01 | 구판 |
| 3 | ASME B1.20.3-1976(R2023) | Dryseal Pipe Threads,Inch (B1.20.3 - 1976) | 1976-01-01 | 표준 |
관련상품이 존재하지 않습니다.
ASME B1.20.7-1991(R2018) - Hose Coupling Screw Threads, Inch (B1.20.7 - 1991) 상세보기
ASME B1.20.5-1991(R2014) - Gaging for Dryseal Pipe Threads-Inch (B1.20.5 - 1991) 상세보기
ASME B1.20.1-2013 - Pipe Threads, General Purpose, Inch (B1.20.1 - 2013) 상세보기
ASME B1.20.1-1983(R2006) - Pipe Threads, General Purpose, Inch (B1.20.1 - 1983) 상세보기
ASME B1.1-2003(R2018) - Unified Inch Screw Threads, (UN and UNR Thread Form) (B1.1 - 2003) 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
