관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
구판
판매
Standard Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes
| 분야 | |||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 적용범위 | 1.1?This specification covers a group of requirements that, unless otherwise specified in an individual specification, shall apply to the ASTM product specifications noted below.
1.2?In the case of conflict between a requirement of a product specification and a requirement of this general requirements specification, the product specification shall prevail. In the case of conflict between a requirement of the product specification or a requirement of this general requirements specification and a more stringent requirement of the purchase order, the purchase order shall prevail. 1.3?The values stated in either SI units or inch-pound units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. The inch-pound units shall apply unless the “M” designation (SI) of the product specification is specified in the order. 1.4?This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
||||||||||||||||||||||||||||||||||
| 국제분류(ICS)코드 | |||||||||||||||||||||||||||||||||||
| 페이지수 | 11 | ||||||||||||||||||||||||||||||||||
| Edition | 23 |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | ASTM A1016/A1016M-24a | Standard Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes | 2024-10-15 | 표준 |
| 2 | ASTM A1016/A1016M-24a REDLINE | Standard Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes | 2024-10-15 | 표준 |
| 3 | ASTM A1016/A1016M-24 REDLINE | Standard Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes | 2024-05-01 | 구판 |
| 4 | ASTM A1016/A1016M-24 | Standard Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes | 2024-05-01 | 구판 |
| 5 | ASTM A1016/A1016M-23 | Standard Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes | 2023-11-01 | 구판 |
| 6 | ASTM A1016/A1016M-23 REDLINE | Standard Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes | 2023-11-01 | 구판 |
| 7 | ASTM A1016/A1016M-18a REDLINE | Standard Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes | 2018-09-01 | 구판 |
| 8 | ASTM A1016/A1016M-18a | Standard Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes | 2018-09-01 | 구판 |
| 9 | ASTM A1016/A1016M-18 | Standard Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes | 2018-03-01 | 구판 |
| 10 | ASTM A1016/A1016M-17a | Standard Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes | 2017-09-01 | 구판 |
| 11 | ASTM A1016/A1016M-17 | Standard Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes | 2017-03-15 | 구판 |
| 12 | ASTM A1016/A1016M-14e1 | Standard Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes | 2014-03-01 | 구판 |
| 13 | ASTM A1016/A1016M-14 | Standard Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes | 2014-03-01 | 구판 |
| 14 | ASTM A1016/A1016M-13 | Standard Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes | 2013-04-01 | 구판 |
| 15 | ASTM A1016/A1016M-11a | Standard Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes | 2011-05-15 | 구판 |
| 16 | ASTM A1016/A1016M-11 | Standard Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes | 2011-04-01 | 구판 |
| 17 | ASTM A1016/A1016M-10 | Standard Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes | 2010-10-01 | 구판 |
| 18 | ASTM A1016/A1016M-08 | Standard Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes | 2008-10-01 | 구판 |
| 19 | ASTM A1016/A1016M-04a | Standard Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes | 2004-07-01 | 구판 |
| 20 | ASTM A1016/A1016M-04 | Standard Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes | 2004-04-01 | 구판 |
| 21 | ASTM A1016/A1016M-02a | Standard Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes | 2002-06-10 | 구판 |
| 22 | ASTM A1016/A1016M-02 | Standard Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes | 2002-01-10 | 구판 |
| 23 | ASTM A1016/A1016M-01a | Standard Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes | 2002-01-10 | 구판 |
| 24 | ASTM A1016/A1016M-01 | Standard Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes | 2002-01-10 | 구판 |
관련상품이 존재하지 않습니다.
KS D ISO 10278 - 강 — 망가니즈 함유량의 정량 — 유도결합 플라스마 방출 분광 분석법 상세보기
ASTM E340-23 REDLINE - Standard Practice for Macroetching Metals and Alloys 상세보기
ASTM E407-23 REDLINE - Standard Practice for Microetching Metals and Alloys 상세보기
ASTM E45-18a(2023) - Standard Test Methods for Determining the Inclusion Content of Steel 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
