ASTM E1473-22 REDLINE Standard Test Methods for Chemical Analysis of Nickel, Cobalt, and High-Temperature Alloys

관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.

PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)

PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)

표준 판매

ASTM E1473-22 REDLINE

Standard Test Methods for Chemical Analysis of Nickel, Cobalt, and High-Temperature Alloys

- 발행일 : 2022-11-15
- 발행기관 : ASTM

레드라인 이란?: 최신표준과 직전 구판표준의 변경내용을 포함하고 있는 버전. 구입 시 최신표준과 레드라인 두 개 파일을 제공합니다.(단, ISO는 제외)

언어	제공형태	판매가격	선택
(레드라인) 영어	PDF	184,800원
(레드라인) 영어	PRINT	184,800원

장바구니 담기

상품이 장바구니에 담겼습니다.

장바구니로 이동

상세정보

분야

적용범위

1.1?These test methods describe the chemical analysis of nickel, cobalt, and high-temperature alloys having chemical compositions within the following limits:

?	Element	Composition Range,?%					?
?	Aluminum	?	0.005	to	7.00	?	?
?	Beryllium	?	0.001	to	0.05	?	?
?	Boron	?	0.001	to	1.00	?	?
?	Calcium	?	0.002	to	0.05	?	?
?	Carbon	?	0.001	to	1.10	?	?
?	Chromium	?	0.10	to	33.00	?	?
?	Cobalt	?	0.10	to	75.00	?	?
?	Copper	?	0.01	to	35.00	?	?
?	Iron	?	0.01	to	50.00	?	?
?	Lead	?	0.001	to	0.01	?	?
?	Magnesium	?	0.001	to	0.05	?	?
?	Manganese	?	0.01	to	3.0	?	?
?	Molybdenum	?	0.01	to	30.0	?	?
?	Niobium (Columbium)	?	0.01	to	6.0?	?	?
?	Nickel	?	0.10	to	98.0	?	?
?	Nitrogen	?	0.001	to	0.20	?	?
?	Phosphorus	?	0.002	to	0.08	?	?
?	Sulfur	?	0.002	to	0.10	?	?
?	Silicon	?	0.01	to	5.00	?	?
?	Tantalum	?	0.005	to	1.00	?	?
?	Tin	?	0.002	to	0.10	?	?
?	Titanium	?	0.01	to	5.00	?	?
?	Tungsten	?	0.01	to	18.00	?	?
?	Vanadium	?	0.01	to	3.25	?	?
?	Zinc	?	0.001	to	0.01	?	?
?	Zirconium	?	0.01	to	2.50	?	?

1.2?The test methods in this standard are contained in the sections indicated as follows:

Aluminum, Total by the 8-Quinolinol Gravimetric Method ?(0.20?% to 7.00?%)	53 to 60
Chromium by the Atomic Absorption Spectrometry Method ?(0.018?% to 1.00?%)	91 to 100
Chromium by the Peroxydisulfate Oxidation?Titration Method ?(0.10?% to 33.00?%)	101 to 109
Cobalt by the Ion-Exchange-Potentiometric Titration Method ?(2?% to 75?%)	25 to 32
Cobalt by the Nitroso-R-Salt Spectrophotometric Method ?(0.10?% to 5.0?%)	33 to 42
Copper by Neocuproine Spectrophotometric Method ?(0.010?% to 10.00?%)	43 to 52
Iron by the Silver Reduction Titrimetric Method ?(1.0?% to 50.0?%)	118 to 125
Manganese by the Metaperiodate Spectrophotometric Method ?(0.05?% to 2.00?%)	8 to 17
Molybdenum by the Ion Exchange?8-Hydroxyquinoline ? Gravimetric Method (1.5?% to 30?%)	110 to 117
Molybdenum by the Thiocyanate Spectrophotometric Method ?(0.01?% to 1.50?%)	79 to 90
Nickel by the Dimethylglyoxime Gravimetric Method ?(0.1?% to 84.0?%)	61 to 68
Niobium by the Ion Exchange?Cupferron Gravimetric Method ?(0.5?% to 6.0?%)	126 to 133
Silicon by the Gravimetric Method (0.05?% to 5.00?%)	18 to 24
Tantalum by the Ion Exchange?Pyrogallol Spectrophotometric ?Method (0.03?% to 1.0?%)	134 to 142
Tin by the Solvent Extraction-Atomic Absorption Spectrometry Method (0.002?% to 0.10?%)	69 to 78

1.3?Other test methods applicable to the analysis of nickel alloys that may be used in lieu of or in addition to this method are E1019, E1834, E1835, E1917, E1938, E2465, E2594, E2823.

1.4?Some of the composition ranges given in 1.1 are too broad to be covered by a single method, and therefore, these test methods contain multiple methods for some elements. The user must select the proper test method by matching the information given in the scope and interference sections of each test method with the composition of the alloy to be analyzed.

1.5?Units?The values stated in SI units are regarded as standard.

1.6?This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. Specific caution and hazard statements are given in Section 7 and in 13.4, 15.1.1, 15.1.2, 21.2, 22.3, 57.3, 84.2, 114.5, 115.14, 130.4, 130.5, 138.5, and 138.6.

1.7?This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

국제분류(ICS)코드

페이지수

Edition

이력정보

No.	표준번호	표준명	발행일	상태
1	ASTM E1473-22	Standard Test Methods for Chemical Analysis of Nickel, Cobalt, and High-Temperature Alloys	2022-11-15	표준
2	ASTM E1473-22 REDLINE	Standard Test Methods for Chemical Analysis of Nickel, Cobalt, and High-Temperature Alloys	2022-11-15	표준
3	ASTM E1473-16	Standard Test Methods for Chemical Analysis of Nickel, Cobalt and High-Temperature Alloys	2016-04-01	구판
4	ASTM E1473-16 REDLINE	Standard Test Methods for Chemical Analysis of Nickel, Cobalt and High-Temperature Alloys	2016-04-01	구판
5	ASTM E1473-09	Standard Test Methods for Chemical Analysis of Nickel, Cobalt, and High-Temperature Alloys	2009-06-01	구판
6	ASTM E1473-03	Standard Test Methods for Chemical Analysis of Nickel, Cobalt, and High-Temperature Alloys	2003-12-01	구판
7	ASTM E1473-94a(2003)	Standard Test Methods for Chemical Analysis of Nickel, Cobalt, and High-Temperature Alloys	2003-10-01	구판
8	ASTM E1473-94a(1998)	Standard Test Methods for Chemical Analysis of Nickel, Cobalt, and High-Temperature Alloys	1998-12-10	구판

관련상품

관련상품이 존재하지 않습니다.
다른 사람이 함께 구입한 상품

DIN EN 573-3:2022-09 - Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition and form of products (includes Amendment A1:2022) 상세보기

DIN EN 755-1:2016-10 - Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 1: Technical conditions for inspection and delivery 상세보기

DIN EN 515:2017-05 - Aluminium and aluminium alloys - Wrought products - Temper designations 상세보기

ASTM B637-16 - Standard Specification for Precipitation-Hardening and Cold Worked Nickel Alloy Bars, Forgings, and Forging Stock for Moderate or High Temperature Service 상세보기
추천 상품

IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기

IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기

KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기

KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기

KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기

해외표준

ASTM E1473-22 REDLINE

상세정보

이력정보

관련상품

다른 사람이 함께 구입한 상품

추천 상품

전체서비스 보기