관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
분야 | |
---|---|
적용범위 | 1.1 This test method covers the determination of ash in the range 0.010 % to 0.180 % by mass, from distillate and residual fuels, gas turbine fuels, crude oils, lubricating oils, waxes, and other petroleum products, in which any ash-forming materials present are normally considered to be undesirable impurities or contaminants (Note 1). The test method is limited to petroleum products which are free from added ash-forming additives, including certain phosphorus compounds (Note 2). Note 1: In certain types of samples, all of the ash-forming metals are not retained quantitatively in the ash. This is particularly true of distillate oils, which require a special ash procedure in order to retain metals quantitatively. Note 2: This test method is not intended for the analysis of unused lubricating oils containing additives; for such samples use Test Method D874. Neither is it intended for the analysis of lubricating oils containing lead nor for used engine crankcase oils. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. The preferred expression of the property is mass %. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
국제분류(ICS)코드 | |
페이지수 | 4 |
Edition | 19 |
No. | 표준번호 | 표준명 | 발행일 | 상태 |
---|---|---|---|---|
1 | ASTM D482-19 | Standard Test Method for Ash from Petroleum Products | 2019-11-01 | 표준 |
2 | ASTM D482-19 REDLINE | Standard Test Method for Ash from Petroleum Products | 2019-11-01 | 표준 |
3 | ASTM D482-13 REDLINE | Standard Test Method for Ash from Petroleum Products | 2013-06-15 | 구판 |
4 | ASTM D482-13 | Standard Test Method for Ash from Petroleum Products | 2013-06-15 | 구판 |
5 | ASTM D482-12 | Standard Test Method for Ash from Petroleum Products | 2012-12-01 | 구판 |
6 | ASTM D482-07 | Standard Test Method for Ash from Petroleum Products | 2007-12-01 | 구판 |
7 | ASTM D482-03 | Standard Test Method for Ash from Petroleum Products | 2003-05-10 | 구판 |
8 | ASTM D482-02 | Standard Test Method for Ash from Petroleum Products | 2002-11-10 | 구판 |
9 | ASTM D482-00a | Standard Test Method for Ash from Petroleum Products | 2000-04-10 | 구판 |
10 | ASTM D482-00ae1 | Standard Test Method for Ash from Petroleum Products | 2000-04-10 | 구판 |
11 | ASTM D482-01 | Standard Test Method for Ash and Petroleum Products | 구판 |
관련상품이 존재하지 않습니다.
ASTM D849-15(2019)e1 - Standard Test Method for Copper Strip Corrosion by Industrial Aromatic Hydrocarbons 상세보기
ASTM D850-18e1 - Standard Test Method for Distillation of Industrial Aromatic Hydrocarbons and Related Materials 상세보기
ASTM D2158-16ae1 - Standard Test Method for Residues in Liquefied Petroleum (LP) Gases 상세보기
ASTM D2029-97(2017) - Standard Test Methods for Water Vapor Content of Electrical Insulating Gases by Measurement of Dew Point 상세보기
ASTM D6304-16e1 - Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fischer Titration 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기