관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
표준
판매
Standard Test Method for End (Warp) and Pick (Filling) Count of Woven Fabrics
| 분야 | 07.01 : 섬유(Ⅰ) |
|---|---|
| 적용범위 | 1.1?This test method covers the measurement of end (warp) and pick (filling) count and is applicable to all types of woven fabrics. Note 1:?Historically, the term fabric count has been used to describe the end and pick count of woven fabrics. The terms end count and pick count are replacing the term fabric count, to provide clarity. 1.2?The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.2.1?Throughout this document, there will be some instances in which the units do not convert 1:1. This is to acknowledge that this is a global document and that different parts of the world use different units of measurement. Organizations using the metric system wil report the count per 1 cm. Organizations using the English system will report the count per 1 in. 1.3?This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. Note 2:?For a current test method for the wale and course count of weft knitted fabrics, refer to Test Method D8007. 1.4?This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
| 국제분류(ICS)코드 | 59.080.30 : 직물류 |
| 페이지수 | 4 |
| Edition | 17(2023) |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | ASTM D3775-17(2023) | Standard Test Method for End (Warp) and Pick (Filling) Count of Woven Fabrics | 2023-01-01 | 표준 |
| 2 | ASTM D3775-17e1 | Standard Test Method for End (Warp) and Pick (Filling) Count of Woven Fabrics | 2017-09-01 | 구판 |
| 3 | ASTM D3775-17 | Standard Test Method for End (Warp) and Pick (Filling) Count of Woven Fabrics | 2017-09-01 | 구판 |
| 4 | ASTM D3775-12 | Standard Test Method for Warp (End) and Filling (Pick) Count of Woven Fabrics | 2012-09-01 | 구판 |
| 5 | ASTM D3775-08 | Standard Test Method for Warp (End) and Filling (Pick) Count of Woven Fabrics | 2008-07-01 | 구판 |
| 6 | ASTM D3775-07a | Standard Test Method for Warp (End) and Filling (Pick) Count of Woven Fabrics | 2007-12-01 | 구판 |
| 7 | ASTM D3775-07 | Standard Test Method for Warp (End) and Filling (Pick) Count of Woven Fabrics | 2007-08-01 | 구판 |
| 8 | ASTM D3775-03a | Standard Test Method for Fabric Count of Woven Fabric | 2003-09-10 | 구판 |
| 9 | ASTM D3775-03 | Standard Test Method for Fabric Count of Woven Fabric | 2002-09-10 | 구판 |
| 10 | ASTM D3775-02 | Standard Test Method for Fabric Count of Woven Fabric | 2002-09-10 | 구판 |
| 11 | ASTM D3775-98 | Standard Test Method for Fabric Count of Woven Fabric | 1998-11-11 | 구판 |
관련상품이 존재하지 않습니다.
ASTM D737-18(2023) - Standard Test Method for Air Permeability of Textile Fabrics 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
