관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
표준
판매
Standard Specification for Infrared Thermometers for Intermittent Determination of Patient Temperature
| 분야 | 13.01 : 의료기, 외과용 도구 및 장비 |
|---|---|
| 적용범위 | 1.1?This specification covers electronic instruments intended for intermittent measuring and monitoring of patient temperatures by means of detecting the intensity of thermal radiation between the subject of measurement and the sensor. 1.2?The specification addresses assessing subject’s body internal temperature through measurement of thermal emission from the ear canal. Performance requirements for noncontact temperature measurement of skin are also provided. 1.3?The specification sets limits for laboratory accuracy and requires determination and disclosure of clinical accuracy of the covered instruments. 1.4?Performance and storage limits under various environmental conditions, requirements for labeling, and test procedures are established. Note 1:?For electrical safety, consult Underwriters Laboratory Standards.2 Note 2:?For electromagnetic emission requirements and tests, refer to CISPR 11: 1990 Lists of Methods of Measurement of Electromagnetic Disturbance Characteristics of Industrial, Scientific, and Medical (ISM) Radiofrequency Equipment.3 1.5?The values of quantities stated in SI units are to be regarded as the standard. The values of quantities in parentheses are not in SI and are optional. 1.6?The following precautionary caveat pertains only to the test method portion, Section 6, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.7?This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
| 국제분류(ICS)코드 | 17.040.20 : 표면 성질 |
| 페이지수 | 17 |
| Edition | 98(2023) |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | ASTM E1965-98(2023) | Standard Specification for Infrared Thermometers for Intermittent Determination of Patient Temperature | 2023-02-01 | 표준 |
| 2 | ASTM E1965-98(2016) | Standard Specification for Infrared Thermometers for Intermittent Determination of Patient Temperature | 2016-10-01 | 구판 |
| 3 | ASTM E1965-98(2009) | Standard Specification for Infrared Thermometers for Intermittent Determination of Patient Temperature | 2009-05-01 | 구판 |
| 4 | ASTM E1965-98(2003) | Standard Specification for Infrared Thermometers for Intermittent Determination of Patient Temperature | 2003-05-10 | 구판 |
| 5 | ASTM E1965-98 | Standard Specification for Infrared Thermometers for Intermittent Determination of Patient Temperature | 1998-08-10 | 구판 |
관련상품이 존재하지 않습니다.
ASTM F384-17 - Standard Specifications and Test Methods for Metallic Angled Orthopedic Fracture Fixation Devices 상세보기
ASTM F2180-17 - Standard Specification for Metallic Implantable Strands and Cables 상세보기
ASTM F2665-21 - Standard Specification for Total Ankle Replacement Prosthesis 상세보기
ASTM F3140-23 - Standard Test Method for Cyclic Fatigue Testing of Metal Tibial Tray Components of Unicondylar Knee Joint Replacements 상세보기
ASTM F2722-21 - Standard Practice for Evaluating Mobile Bearing Knee Tibial Baseplate Rotational Stops 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
