관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
표준
판매
Standard Guide for Descaling and Cleaning Titanium and Titanium Alloy Surfaces
| 분야 | 02.04 : 비철금속-니켈, 납, 주석, 귀금속, 일차금속 등 |
|---|---|
| 적용범위 | 1.1?This guide covers a cleaning and descaling procedure useful to producers, users, and fabricators of titanium and titanium alloys for the removal of ordinary shop soils, oxides, and scales resulting from heat treatment operations and foreign substances present as surface contaminants. 1.2?It is not intended that these procedures be mandatory for removal of any of the indicated soils but rather serve as a guide when titanium and titanium alloys are being processed in the wrought, cast, or fabricated form. 1.3?It is the intent that these soils be removed prior to chemical milling, joining, plating, fabrication, and in any situation where foreign substances interfere with the corrosion resistance, stability, and quality of the finished product. 1.4?Acid etching may be required following cleaning when the surface has an oxygen-contaminated layer or alpha case present. 1.5?The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.6?This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.7?This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
| 국제분류(ICS)코드 | 77.150.50 : 티타늄 제품 |
| 페이지수 | 3 |
| Edition | 22 |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | ASTM B600-22 | Standard Guide for Descaling and Cleaning Titanium and Titanium Alloy Surfaces | 2022-10-01 | 표준 |
| 2 | ASTM B600-22 REDLINE | Standard Guide for Descaling and Cleaning Titanium and Titanium Alloy Surfaces | 2022-10-01 | 표준 |
| 3 | ASTM B600-11(2017) | Standard Guide for Descaling and Cleaning Titanium and Titanium Alloy Surfaces | 2017-05-01 | 구판 |
| 4 | ASTM B600-11 | Standard Guide for Descaling and Cleaning Titanium and Titanium Alloy Surfaces | 2011-09-01 | 구판 |
| 5 | ASTM B600-09 | Standard Guide for Descaling and Cleaning Titanium and Titanium Alloy Surfaces | 2009-11-01 | 구판 |
| 6 | ASTM B600-91(2002)e1 | Standard Guide for Descaling and Cleaning Titanium and Titanium Alloy Surfaces | 1991-03-15 | 구판 |
| 7 | ASTM B600-91(1997)e1 | Standard Guide for Descaling and Cleaning Titanium and Titanium Alloy Surfaces | 1991-03-15 | 구판 |
| 8 | ASTM B600-91(2002) | Standard Guide for Descaling and Cleaning Titanium and Titanium Alloy Surfaces | 1991-03-15 | 구판 |
관련상품이 존재하지 않습니다.
ASTM ISO/ASTM52921-13(2019) - Standard Terminology for Additive Manufacturing—Coordinate Systems and Test Methodologies 상세보기
ASTM F3353-19 - Standard Guide for Shipboard Use of Lithium-Ion (Li-ion) Batteries 상세보기
ASTM E10-18 - Standard Test Method for Brinell Hardness of Metallic Materials 상세보기
ASTM E1251-17a - Standard Test Method for Analysis of Aluminum and Aluminum Alloys by Spark Atomic Emission Spectrometry 상세보기
ASTM E1479-16 - Standard Practice for Describing and Specifying Inductively Coupled Plasma Atomic Emission Spectrometers 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
