관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
표준
판매
Standard Practice for Short-Term Intramuscular Screening of Implantable Medical Device Materials
| 분야 | 13.01 : 의료기, 외과용 도구 및 장비 |
|---|---|
| 적용범위 | 1.1?This practice provides guidelines for short-term testing or screening of candidate materials, both porous and dense, as to the local effects of the material that is implanted intramuscularly. This method may not be applicable for absorbable materials, depending on the absorption profile of the test material. The tissue reactions will be evaluated in comparison to those evoked by control materials that are accepted as clinical implant materials. This is a short-term (less than 30 days) screening procedure for determining acceptability of candidate materials. 1.2?This practice, along with other appropriate biological tests (including other appropriate ASTM tests), may be used in the biocompatibility assessment of the candidate materials for use in the fabrication of devices for clinical application. 1.3?This experimental protocol is not designed to provide a comprehensive assessment of the systemic toxicity, carcinogenicity, or mutagenicity of the material since other standards address these issues. 1.4?This practice is one of several developed for the assessment of the biocompatibility of materials. Practice F748 provides guidance for the selection of appropriate methods for testing materials for a specific application. 1.5?The values stated in SI units, including units officially accepted for use with SI, are to be regarded as standard. No other systems of measurement are included in this standard. 1.6?This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.7?This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
| 국제분류(ICS)코드 | 11.040.40 : 외과. 보철술. 교정술용 이식 |
| 페이지수 | 5 |
| Edition | 22 |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | ASTM F763-22 | Standard Practice for Short-Term Intramuscular Screening of Implantable Medical Device Materials | 2022-09-01 | 표준 |
| 2 | ASTM F763-22 REDLINE | Standard Practice for Short-Term Intramuscular Screening of Implantable Medical Device Materials | 2022-09-01 | 표준 |
| 3 | ASTM F763-04(2016) | Standard Practice for Short-Term Screening of Implant Materials | 2016-04-01 | 구판 |
| 4 | ASTM F763-04(2010) | Standard Practice for Short-Term Screening of Implant Materials | 2010-06-01 | 구판 |
| 5 | ASTM F763-04 | Standard Practice for Short-Term Screening of Implant Materials | 2004-05-01 | 구판 |
| 6 | ASTM F763-99(2003) | Standard Practice for Short-Term Screening of Implant Materials | 2003-11-01 | 구판 |
| 7 | ASTM F763-99 | Standard Practice for Short-Term Screening of Implant Materials | 1999-05-10 | 구판 |
관련상품이 존재하지 않습니다.
ASTM F719-20e1 - Standard Practice for Testing Materials in Rabbits for Primary Skin Irritation 상세보기
ASTM F750-20 - Standard Practice for Evaluating Acute Systemic Toxicity of Material Extracts by Systemic Injection in the Mouse 상세보기
ASTM F720-17 - Standard Practice for Testing Guinea Pigs for Contact Allergens: Guinea Pig Maximization Test 상세보기
ASTM F895-11(2016) - Standard Test Method for Agar Diffusion Cell Culture Screening for Cytotoxicity 상세보기
ISO/TS 10993-20:2006 - Biological evaluation of medical devices — Part 20: Principles and methods for immunotoxicology testing of medical devices 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
