관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
표준
판매
Standard Test Method for Flatwise Compressive Properties of Sandwich Cores
| 분야 | 15.03 : 공간시물레이션; 항공우주재료; 고율섬유와 합성물 |
|---|---|
| 적용범위 | 1.1?This test method covers the determination of compressive strength and modulus of sandwich cores. These properties are usually determined for design purposes in a direction normal to the plane of the face sheets (also referred to as the facing plane) as the core would be placed in a structural sandwich construction. The test procedures pertain to compression in this direction in particular, but also can be applied with possible minor variations to determining compressive properties in other directions. Permissible core material forms include those with continuous bonding surfaces (such as balsa wood and foams) as well as those with discontinuous bonding surfaces (such as honeycomb). 1.2?This test method does not cover the determination of compressive core crush properties. Reference Test Method D7336/D7336M for determination of static energy absorption properties of honeycomb sandwich core materials. 1.3?Units?The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system are not necessarily exact equivalents; therefore, to ensure conformance with the standard, each system shall be used independently of the other, and values from the two systems shall not be combined. 1.3.1?Within the text, the inch-pound units are shown in brackets. 1.4?This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5?This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
| 국제분류(ICS)코드 | 83.120 : 강화 플라스틱 |
| 페이지수 | 8 |
| Edition | 22 |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | ASTM C365/C365M-22 | Standard Test Method for Flatwise Compressive Properties of Sandwich Cores | 2022-05-01 | 표준 |
| 2 | ASTM C365/C365M-22 REDLINE | Standard Test Method for Flatwise Compressive Properties of Sandwich Cores | 2022-05-01 | 표준 |
| 3 | ASTM C365/C365M-16 | Standard Test Method for Flatwise Compressive Properties of Sandwich Cores | 2016-05-15 | 구판 |
| 4 | ASTM C365/C365M-16 REDLINE | Standard Test Method for Flatwise Compressive Properties of Sandwich Cores | 2016-05-15 | 구판 |
| 5 | ASTM C365/C365M-11a | Standard Test Method for Flatwise Compressive Properties of Sandwich Cores | 2011-11-01 | 구판 |
| 6 | ASTM C365/C365M-11 | Standard Test Method for Flatwise Compressive Properties of Sandwich Cores | 2011-04-01 | 구판 |
| 7 | ASTM C365/C365M-05 | Standard Test Method for Flatwise Compressive Properties of Sandwich Cores | 2005-10-01 | 구판 |
관련상품이 존재하지 않습니다.
ASTM D790-17 - Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials 상세보기
ASTM D4060-19 - Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser 상세보기
ASTM C393/C393M-20 - Standard Test Method for Core Shear Properties of Sandwich Constructions by Beam Flexure 상세보기
ASTM D1781-98(2021) - Standard Test Method for Climbing Drum Peel for Adhesives 상세보기
ASTM D3363-22 - Standard Test Method for Film Hardness by Pencil Test 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
