ASTM E354-21e1 Standard Test Methods for Chemical Analysis of High-Temperature, Electrical, Magnetic, and Other Similar Iron, Nickel, and Cobalt Alloys

관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.

PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)

PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)

표준 판매

ASTM E354-21e1

Standard Test Methods for Chemical Analysis of High-Temperature, Electrical, Magnetic, and Other Similar Iron, Nickel, and Cobalt Alloys

- 발행일 : 2021-03-01
- 발행기관 : ASTM

언어	제공형태	판매가격	선택
영어	PDF	153,800원
영어	PRINT	153,800원

장바구니 담기

상품이 장바구니에 담겼습니다.

장바구니로 이동

상세정보

분야

03.05 : 금속, 광석 및 관련 재료의 분석화학

적용범위

1.1?These test methods cover the chemical analysis of high-temperature, electrical, magnetic, and other similar iron, nickel, and cobalt alloys having chemical compositions within the following limits:

?	??Element	Composition Range,?%			?
?	?	?	?	?	?
?	Aluminum	0.005	to	18.00	?
?	Beryllium	0.001	to	?0.05	?
?	Boron	0.001	to	?1.00	?
?	Calcium	0.002	to	? 0.05	?
?	Carbon	0.001	to	?1.10	?
?	Chromium	0.10?	to	33.00	?
?	Cobalt	0.10?	to	75.00	?
?	Columbium (Niobium)	0.01?	to	?6.0	?
?	Copper	0.01?	to	10.00	?
?	Iron	0.01?	to	85.00	?
?	Magnesium	0.001	to	?0.05	?
?	Manganese	0.01?	to	?3.0	?
?	Molybdenum	0.01?	to	30.0	?
?	Nickel	0.10?	to	84.0	?
?	Nitrogen	0.001	to	?0.20	?
?	Phosphorus	0.002	to	?0.08	?
?	Silicon	0.01?	to	?5.00	?
?	Sulfur	0.002	to	?0.10	?
?	Tantalum	0.005	to	10.0	?
?	Titanium	0.01?	to	?5.00	?
?	Tungsten	0.01?	to	18.00	?
?	Vanadium	0.01?	to	?3.25	?
?	Zirconium	0.01?	to	?2.50	?

1.2?The test methods in this standard are contained in the sections indicated below:

?	Sections
?	?
Aluminum, Total, by the 8-Quinolinol Gravimetric Method (0.20 % ???to 7.00?%)	100???107
Carbon, Total, by the Combustion-Thermal Conductivity Method?Discontinued 1986	124 ? 134
Carbon, Total, by the Combustion Gravimetric Method (0.05 % to ?1.10?%)?Discontinued 2014	79???89
Chromium by the Atomic Absorption Spectrometry Method ???(0.006?% to 1.00?%)	165???174
Chromium by the Peroxydisulfate Oxidation?Titration Method ?(0.10 % to 33.00?%)	?175???183
Chromium by the Peroxydisulfate-Oxidation Titrimetric Method? ???Discontinued 1980	116???123
Cobalt by the Ion-Exchange-Potentiometric Titration Method (2 % ???to 75?%)	?53???60
Cobalt by the Nitroso-R-Salt Spectrophotometric Method (0.10 % ??? to 5.0?%)	?61???70
Copper by Neocuproine Spectrophotometric Method (0.01 % to ???10.00?%)	?90???99
Copper by the Sulfide Precipitation-Electrodeposition Gravimetric ?Method (0.01 % to 10.00?%)	?71???78
Iron by the Silver Reduction Titrimetric Method (1.0 % to 50.0?%)	192??199
Manganese by the Metaperiodate Spectrophotometric Method ???(0.05 % to 2.00?%)	?9???18
Molybdenum by the Ion Exchange?8-Hydroxyquinoline Gravi- ?metric Method (1.5 % to 30?%)	184???191
Molybdenum by the Thiocyanate Spectrophotometric Method ???(0.01?% to 1.50?%)	153???164
Nickel by the Dimethylglyoxime Gravimetric Method (0.1 % to ?84.0?%)	135???142
Phosphorus by the Molybdenum Blue Spectrophotometric Method ???(0.002 % to 0.08?%)	19????30
Silicon by the Gravimetric Method (0.05 % to 5.00?%)	46????52
Sulfur by the Gravimetric Method?Discontinued ???1988	Former 30????36
Sulfur by the Combustion-Iodate Titration Method (0.005 % to ?0.1?%)?Discontinued 2014	37????45
Sulfur by the Chromatographic Gravimetric Method?Discontinued ???1980	108???115
Tin by the Solvent Extraction?Atomic Absorption Spectrometry ???Method (0.002 % to 0.10?%)	143????152

1.3?Methods for the determination of carbon and sulfur not included in this standard can be found in Test Methods E1019.

1.4?Some of the composition ranges given in 1.1 are too broad to be covered by a single method and therefore this standard contains multiple methods for some elements. The user must select the proper method by matching the information given in the Scope and Interference sections of each method with the composition of the alloy to be analyzed.

1.5?Units?The values stated in SI units are to be regarded as standard.

1.6?This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. Specific hazards statements are given in Section 6 and in special “Warning” paragraphs throughout these test methods.

1.7?This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

국제분류(ICS)코드

77.140.40 : 특수 자기특성을 갖은 강

페이지수

Edition

21e1

이력정보

No.	표준번호	표준명	발행일	상태
1	ASTM E354-21	Standard Test Methods for Chemical Analysis of High-Temperature, Electrical, Magnetic, and Other Similar Iron, Nickel, and Cobalt Alloys	2021-03-01	구판
2	ASTM E354-21 REDLINE	Standard Test Methods for Chemical Analysis of High-Temperature, Electrical, Magnetic, and Other Similar Iron, Nickel, and Cobalt Alloys	2021-03-01	구판
3	ASTM E354-21e1	Standard Test Methods for Chemical Analysis of High-Temperature, Electrical, Magnetic, and Other Similar Iron, Nickel, and Cobalt Alloys	2021-03-01	표준
4	ASTM E354-14 REDLINE	Standard Test Methods for Chemical Analysis of High-Temperature, Electrical, Magnetic, and Other Similar Iron, Nickel, and Cobalt Alloys	2014-09-15	구판
5	ASTM E354-14	Standard Test Methods for Chemical Analysis of High-Temperature, Electrical, Magnetic, and Other Similar Iron, Nickel, and Cobalt Alloys	2014-09-15	구판
6	ASTM E354-93(2006)	Standard Test Methods for Chemical Analysis of High-Temperature, Electrical, Magnetic, and Other Similar Iron, Nickel, and Cobalt Alloys	2006-06-01	구판
7	ASTM E354-93(2000)e1	Standard Test Methods for Chemical Analysis of High-Temperature, Electrical, Magnetic, and Other Similar Iron, Nickel, and Cobalt Alloys	2000-01-01	구판

관련상품

관련상품이 존재하지 않습니다.
다른 사람이 함께 구입한 상품

ASTM E21-20 - Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials 상세보기

ASTM E353-19e1 - Standard Test Methods for Chemical Analysis of Stainless, Heat-Resisting, Maraging, and Other Similar Chromium-Nickel-Iron Alloys 상세보기

ASTM E18-22 - Standard Test Methods for Rockwell Hardness of Metallic Materials 상세보기

ASTM E8/E8M-22 - Standard Test Methods for Tension Testing of Metallic Materials 상세보기

ASTM E292-18 - Standard Test Methods for Conducting Time-for-Rupture Notch Tension Tests of Materials 상세보기
추천 상품

IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기

IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기

KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기

KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기

KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기

해외표준

ASTM E354-21e1

상세정보

이력정보

관련상품

다른 사람이 함께 구입한 상품

추천 상품

전체서비스 보기