관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
표준
판매
Standard Practice for Ultrasonic Inspection of Aluminum-Alloy Wrought Products
| 분야 | 03.03 : 비 파괴검사 (Ⅰ) |
|---|---|
| 적용범위 | 1.1?This practice covers the requirements for pulse-echo ultrasonic inspection and includes criteria used to define applicable quality levels of aluminum-alloy wrought products when performance of the ultrasonic test by the producer is specified, or when ultrasonic inspection is performed by the purchaser upon receipt. 1.2?This practice is not applicable if plastic deformation is introduced into the material after delivery. 1.3?The ultrasonic test described in this practice is employed to detect internal discontinuities oriented in a direction parallel to, or nearly parallel to, the surface of the product. The test is performed either by the immersion method or the contact method using pulsed longitudinal waves which are transmitted and received by a search unit containing either a single crystal or a combination of electrically interconnected multiple crystals. Ultrasonic tests employing either the through-transmission or the angle-beam techniques are not included. Note 1:?Ultrasonic tests employing angle-beam techniques require special reference blocks, search units, and scanning procedures and are subject to negotiation between the purchaser and the seller when such tests are required by the contract or purchase order. 1.4?The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are mathematical conversions to SI units which are provided for information only and are not considered standard. 1.5?This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6?This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
| 국제분류(ICS)코드 |
77.040.20 : 금속의 비파괴 시험
77.120.10 : 알루미늄 및 알루미늄합금 |
| 페이지수 | 10 |
| Edition | 19e1 |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | ASTM B594-19 | Standard Practice for Ultrasonic Inspection of Aluminum-Alloy Wrought Products | 2019-05-01 | 구판 |
| 2 | ASTM B594-19 REDLINE | Standard Practice for Ultrasonic Inspection of Aluminum-Alloy Wrought Products | 2019-05-01 | 구판 |
| 3 | ASTM B594-19e1 | Standard Practice for Ultrasonic Inspection of Aluminum-Alloy Wrought Products | 2019-05-01 | 표준 |
| 4 | ASTM B594-13 REDLINE | Standard Practice for Ultrasonic Inspection of Aluminum-Alloy Wrought Products | 2013-05-01 | 구판 |
| 5 | ASTM B594-13 | Standard Practice for Ultrasonic Inspection of Aluminum-Alloy Wrought Products | 2013-05-01 | 구판 |
| 6 | ASTM B594-09 | Standard Practice for Ultrasonic Inspection of Aluminum-Alloy Wrought Products for Aerospace Applications | 2009-12-01 | 구판 |
| 7 | ASTM B594-06 | Standard Practice for Ultrasonic Inspection of Aluminum-Alloy Wrought Products for Aerospace Applications | 2006-11-01 | 구판 |
| 8 | ASTM B594-97 | Standard Practice for Ultrasonic Inspection of Aluminum-Alloy Wrought Products for Aerospace Applications | 2002-04-10 | 구판 |
| 9 | ASTM B594-02 | Standard Practice for Ultrasonic Inspection of Aluminum-Alloy Wrought Products for Aerospace Applications | 2002-04-10 | 구판 |
관련상품이 존재하지 않습니다.
ASTM E446-20 REDLINE - Standard Reference Radiographs for Steel Castings Up to 2 in. (50.8 mm) in Thickness 상세보기
ASTM E186-20 REDLINE - Standard Reference Radiographs for Heavy-Walled (2 to 4
ASTM A388/A388M-19 REDLINE - Standard Practice for Ultrasonic Examination of Steel Forgings 상세보기
ASTM B645-21 - Standard Practice for Linear-Elastic Plane-Strain Fracture Toughness Testing of Aluminum Alloys 상세보기
ASTM A609/A609M-12(2018) - Standard Practice for Castings, Carbon, Low-Alloy, and Martensitic Stainless Steel, Ultrasonic Examination Thereof 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
