관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
구판
판매
Standard Specification for Carbon Steel Forgings for Pressure Vessel Components
| 분야 | 01.05 : 철강-환봉, 단조품, 베어링, 체인, 스프링 | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 적용범위 | 1.1 This specification2 covers four grades of carbon steel forgings for boilers, pressure vessels, and associated equipment. Note 1: Designations have been changed as follows:
1.2 Supplementary requirements are provided for use when additional testing or inspection is desired. These shall apply only when specified individually by the purchaser in the order. 1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.4 Unless the order specifies the applicable “M” specification designation, the material shall be furnished to the inch-pound units. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
||||||||||
| 국제분류(ICS)코드 |
77.140.30 : 압력용기용 강
77.140.85 : 철강 단조 |
||||||||||
| 페이지수 | 5 | ||||||||||
| Edition | 20 |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | ASTM A266/A266M-24 | Standard Specification for Carbon Steel Forgings for Pressure Vessel Components | 2024-05-01 | 표준 |
| 2 | ASTM A266/A266M-24 REDLINE | Standard Specification for Carbon Steel Forgings for Pressure Vessel Components | 2024-05-01 | 표준 |
| 3 | ASTM A266/A266M-21 | Standard Specification for Carbon Steel Forgings for Pressure Vessel Components | 2021-05-01 | 구판 |
| 4 | ASTM A266/A266M-20 | Standard Specification for Carbon Steel Forgings for Pressure Vessel Components | 2020-11-01 | 구판 |
| 5 | ASTM A266/A266M-20 REDLINE | Standard Specification for Carbon Steel Forgings for Pressure Vessel Components | 2020-11-01 | 구판 |
| 6 | ASTM A266/A266M-18 | Standard Specification for Carbon Steel Forgings for Pressure Vessel Components | 2018-03-01 | 구판 |
| 7 | ASTM A266/A266M-18 REDLINE | Standard Specification for Carbon Steel Forgings for Pressure Vessel Components | 2018-03-01 | 구판 |
| 8 | ASTM A266/A266M-13 | Standard Specification for Carbon Steel Forgings for Pressure Vessel Components | 2013-11-01 | 구판 |
| 9 | ASTM A266/A266M-11 | Standard Specification for Carbon Steel Forgings for Pressure Vessel Components | 2011-10-01 | 구판 |
| 10 | ASTM A266/A266M-03a(2008) | Standard Specification for Carbon Steel Forgings for Pressure Vessel Components | 2008-03-01 | 구판 |
| 11 | ASTM A266/A266M-03a | Standard Specification for Carbon Steel Forgings for Pressure Vessel Components | 2003-09-10 | 구판 |
| 12 | ASTM A266/A266M-03 | Standard Specification for Carbon Steel Forgings for Pressure Vessel Components | 2003-04-10 | 구판 |
| 13 | ASTM A266/A266M-99 | Standard Specification for Carbon Steel Forgings for Pressure Vessel Components | 1999-09-10 | 구판 |
관련상품이 존재하지 않습니다.
IEEE 515-2017 - IEEE Standard for the Testing, Design, Installation, and Maintenance of Electrical Resistance Trace Heating for Industrial Applications 상세보기
ASTM A240 / A240M - 20a - Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications 상세보기
ASTM E114:2020 - Standard Practice for Ultrasonic Pulse-Echo Straight-Beam Contact Testing 상세보기
ASTM C94 / C94M :2021 - Standard Specification for Ready-Mixed Concrete 상세보기
ASTM A307:2021 - Standard Specification for Carbon Steel Bolts, Studs, and Threaded Rod 60 000 PSI Tensile Strength 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
