관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
분야 | 05.01 : 석유제품 및 윤활유 (Ⅰ) |
---|---|
적용범위 | 1.1 This test method covers the determination of the amount of bromine-reactive material in petroleum hydrocarbons and is thus a measure of trace amounts of unsaturates in these materials. It is applicable to materials having bromine indexes below 1000. 1.2 This test method is applicable only to essentially olefin-free hydrocarbons or mixtures that are substantially free from material lighter than isobutane and have a distillation end point under 288 °C (550 °F). Note 1: This procedure has been cooperatively tested on materials with bromine indexes in the range from 100 to 1000. These materials include petroleum distillates such as straight-run and hydrocracked naphtha, reformer feed, kerosine, and aviation turbine fuel. Note 2: Materials with bromine index greater than 1000 should be tested for bromine number using Test Method D1159/IP 130. Note 3: Bromine index of industrial aromatic hydrocarbons should be determined using Test Method D1492 or D5776. The subcommittee is currently examining ways to achieve more consistent end point values. 1.3 The values stated in SI units are to be regarded as standard. The values given in parentheses after SI units are provided for information only and are not considered standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
국제분류(ICS)코드 | 75.100 : 윤활유 |
페이지수 | 5 |
Edition | 20 |
No. | 표준번호 | 표준명 | 발행일 | 상태 |
---|---|---|---|---|
1 | ASTM D2710-20 | Standard Test Method for Bromine Index of Petroleum Hydrocarbons by Electrometric Titration | 2020-05-01 | 표준 |
2 | ASTM D2710-20 REDLINE | Standard Test Method for Bromine Index of Petroleum Hydrocarbons by Electrometric Titration | 2020-05-01 | 표준 |
3 | ASTM D2710-09(2018) | Standard Test Method for Bromine Index of Petroleum Hydrocarbons by Electrometric Titration | 2018-12-01 | 구판 |
4 | ASTM D2710-09(2013) | Standard Test Method for Bromine Index of Petroleum Hydrocarbons by Electrometric Titration | 2013-10-01 | 구판 |
5 | ASTM D2710-09 | Standard Test Method for Bromine Index of Petroleum Hydrocarbons by Electrometric Titration | 2009-10-01 | 구판 |
6 | ASTM D2710-99(2004)e1 | Standard Test Method for Bromine Index of Petroleum Hydrocarbons by Electrometric Titration | 2004-05-01 | 구판 |
7 | ASTM D2710-99 | Standard Test Method for Bromine Index of Petroleum Hydrocarbons by Electrometric Titration | 1999-06-10 | 구판 |
관련상품이 존재하지 않습니다.
ASTM D130-19 - Standard Test Method for Corrosiveness to Copper from Petroleum Products by Copper Strip Test 상세보기
ASTM D5453-19a - Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence 상세보기
ASTM D381-19 - Standard Test Method for Gum Content in Fuels by Jet Evaporation 상세보기
ASTM D86-20b - Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure 상세보기
ASTM D850-21 - Standard Test Method for Distillation of Industrial Aromatic Hydrocarbons and Related Materials 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기