관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
구판
판매
Standard Test Method for Shear Properties of Composite Materials by the V-Notched Beam Method
| 분야 | 15.03 : 공간시물레이션; 항공우주재료; 고율섬유와 합성물 |
|---|---|
| 적용범위 | 1.1 This test method covers the shear properties of composite materials reinforced by high-modulus fibers. The composite materials are limited to continuous-fiber or discontinuous-fiber-reinforced composites in the following material forms: 1.1.1 Laminates composed only of unidirectional fibrous laminae, with the fiber direction oriented either parallel or perpendicular to the loading axis. 1.1.2 Laminates composed only of woven fabric filamentary laminae with the warp direction oriented either parallel or perpendicular to the loading axis. 1.1.3 Laminates composed only of unidirectional fibrous laminae, containing equal numbers of plies oriented at 0 and 90° in a balanced and symmetric stacking sequence, with the 0° direction oriented either parallel or perpendicular to the loading axis. 1.1.4 Short-fiber-reinforced composites with a majority of the fibers being randomly distributed. Note 1: This shear test concept was originally developed without reference to fiber direction for use on isotropic materials such as metals or ceramics. 1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system are not necessarily exact equivalents; therefore, to ensure conformance with the standard, each system shall be used independently of the other, and values from the two systems shall not be combined. 1.2.1 Within the text, the inch-pound units are shown in brackets. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
| 국제분류(ICS)코드 | 83.140.20 : 적층 시트 |
| 페이지수 | 14 |
| Edition | 19 |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | ASTM D5379/D5379M-19 | Standard Test Method for Shear Properties of Composite Materials by the V-Notched Beam Method | 2019-10-15 | 구판 |
| 2 | ASTM D5379/D5379M-19 REDLINE | Standard Test Method for Shear Properties of Composite Materials by the V-Notched Beam Method | 2019-10-15 | 구판 |
| 3 | ASTM D5379/D5379M-19e1 | Standard Test Method for Shear Properties of Composite Materials by the V-Notched Beam Method | 2019-10-15 | 표준 |
| 4 | ASTM D5379/D5379M-12 REDLINE | Standard Test Method for Shear Properties of Composite Materials by the V-Notched Beam Method | 2012-07-15 | 구판 |
| 5 | ASTM D5379/D5379M-12 | Standard Test Method for Shear Properties of Composite Materials by the V-Notched Beam Method | 2012-07-15 | 구판 |
| 6 | ASTM D5379/D5379M-05 | Standard Test Method for Shear Properties of Composite Materials by the V-Notched Beam Method | 2005-03-01 | 구판 |
| 7 | ASTM D5379/D5379M-98 | Standard Test Method for Shear Properties of Composite Materials by the V-Notched Beam Method | 1998-12-10 | 구판 |
관련상품이 존재하지 않습니다.
ASTM D6641/D6641M-16e1 - Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials Using a Combined Loading Compression (CLC) Test Fixture 상세보기
ASTM D3039/D3039M-17 - Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials 상세보기
ASTM D2344/D2344M-16 - Standard Test Method for Short-Beam Strength of Polymer Matrix Composite Materials and Their Laminates 상세보기
ASTM D3518/D3518M-18 - Standard Test Method for In-Plane Shear Response of Polymer Matrix Composite Materials by Tensile Test of a ±45° Laminate 상세보기
ASTM D3479/D3479M-19 - Standard Test Method for Tension-Tension Fatigue of Polymer Matrix Composite Materials 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
