관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
표준
판매
Standard Test Method for Portable Hardness Testing by the Ultrasonic Contact Impedance Method
| 분야 | 01.03 : 철강-강판, 강대 및 강선 |
|---|---|
| 적용범위 | 1.1 This test method covers the determination of comparative hardness values by applying the Ultrasonic Contact Impedance Method (UCI Method). 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.2.1 Exception—Informational inch-pound units are provided in Note 1 and ksi is used in 12.1. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
| 국제분류(ICS)코드 | 19.100 : 비파괴 시험 및 기구 |
| 페이지수 | 8 |
| Edition | 19 |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | ASTM A1038-19 | Standard Test Method for Portable Hardness Testing by the Ultrasonic Contact Impedance Method | 2019-10-01 | 표준 |
| 2 | ASTM A1038-19 REDLINE | Standard Test Method for Portable Hardness Testing by the Ultrasonic Contact Impedance Method | 2019-10-01 | 표준 |
| 3 | ASTM A1038-17 | Standard Test Method for Portable Hardness Testing by the Ultrasonic Contact Impedance Method | 2017-11-01 | 구판 |
| 4 | ASTM A1038-17 REDLINE | Standard Test Method for Portable Hardness Testing by the Ultrasonic Contact Impedance Method | 2017-11-01 | 구판 |
| 5 | ASTM A1038-13e1 | Standard Test Method for Portable Hardness Testing by the Ultrasonic Contact Impedance Method | 2013-11-01 | 구판 |
| 6 | ASTM A1038-13 | Standard Test Method for Portable Hardness Testing by the Ultrasonic Contact Impedance Method | 2013-11-01 | 구판 |
| 7 | ASTM A1038-10a | Standard Test Method for Portable Hardness Testing by the Ultrasonic Contact Impedance Method | 2010-11-01 | 구판 |
| 8 | ASTM A1038-10 | Standard Practice for Portable Hardness Testing by the Ultrasonic Contact Impedance Method | 2010-05-15 | 구판 |
| 9 | ASTM A1038-08 | Standard Practice for Portable Hardness Testing by the Ultrasonic Contact Impedance Method | 2008-11-01 | 구판 |
| 10 | ASTM A1038-05 | Standard Practice for Portable Hardness Testing by the Ultrasonic Contact Impedance Method | 2005-01-01 | 구판 |
관련상품이 존재하지 않습니다.
ISO 6507-1:2023 - Metallic materials — Vickers hardness test — Part 1: Test method 상세보기
ISO 2063-1:2019 - Thermal spraying — Zinc, aluminium and their alloys — Part 1: Design considerations and quality requirements for corrosion protection systems 상세보기
DIN 50158-2:2008-04 - Metallic materials - Hardness testing with portable measuring instruments operating with electrical penetration depth - Part 2: Verification and calibration of the testing devices 상세보기
DIN 50158-1:2008-07 - Metallic materials - Hardness testing with portable measuring instruments operating with electrical penetration depth - Part 1: Test method 상세보기
DIN 50159-2:2022-06 - Metallic materials - Hardness testing with the UCI method - Part 2: Verification and calibration of the testing devices 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
