관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
구판
판매
Standard Specification for Steel Castings, Carbon, for General Application
| 분야 | 01.02 : 주철-철합금 |
|---|---|
| 적용범위 | 1.1 This specification covers carbon steel castings for general applications that require up to 70 ksi (485 MPa) minimum tensile strength. Note 1: The grades covered by this specification represent materials that are suitable for assembly with other steel castings or wrought steel parts by fusion welding. It is not intended to imply that all these grades possess the same degree of weldability or that the same welding techniques can be used on all castings. It is the responsibility of the purchaser to establish for himself a suitable welding technique. 1.2 Several grades and two classes of steel castings are covered, as indicated below. The grade and class desired shall be specified by the purchaser. 1.2.1 Grade N-1—Chemical analysis only. 1.2.2 Grade N-2—Heat treated but not mechanically tested. 1.2.3 Grade U-60-30 [415-205]—Mechanically tested but not heat treated. 1.2.4 Grades 60-30 [415-205], 65-35 [450-240], 70-36 [485-250], and 70-40 [485-275]—Heat treated and mechanically tested. 1.2.5 Class 1 and Class 2 steel castings shall be specified in accordance with 9.2. 1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
| 국제분류(ICS)코드 | 77.140.80 : 강 및 주철 및 단조 |
| 페이지수 | 4 |
| Edition | 19 |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | ASTM A27/A27M-20 | Standard Specification for Steel Castings, Carbon, for General Application | 2020-05-01 | 표준 |
| 2 | ASTM A27/A27M-20 REDLINE | Standard Specification for Steel Castings, Carbon, for General Application | 2020-05-01 | 표준 |
| 3 | ASTM A27/A27M-19 | Standard Specification for Steel Castings, Carbon, for General Application | 2019-09-01 | 구판 |
| 4 | ASTM A27/A27M-19 REDLINE | Standard Specification for Steel Castings, Carbon, for General Application | 2019-09-01 | 구판 |
| 5 | ASTM A27/A27M-17 | Standard Specification for Steel Castings, Carbon, for General Application | 2017-05-01 | 구판 |
| 6 | ASTM A27/A27M-17 REDLINE | Standard Specification for Steel Castings, Carbon, for General Application | 2017-05-01 | 구판 |
| 7 | ASTM A27/A27M-13(2016) | Standard Specification for Steel Castings, Carbon, for General Application | 2016-09-01 | 구판 |
| 8 | ASTM A27/A27M-13 | Standard Specification for Steel Castings, Carbon, for General Application | 2013-11-01 | 구판 |
| 9 | ASTM A27/A27M-10 | Standard Specification for Steel Castings, Carbon, for General Application | 2010-10-01 | 구판 |
| 10 | ASTM A27/A27M-08 | Standard Specification for Steel Castings, Carbon, for General Application | 2008-10-01 | 구판 |
| 11 | ASTM A27/A27M-05 | Standard Specification for Steel Castings, Carbon, for General Application | 2005-03-01 | 구판 |
| 12 | ASTM A27/A27M-03 | Standard Specification for Steel Castings, Carbon, for General Application | 2003-04-10 | 구판 |
| 13 | ASTM A27/A27M-95(2000) | Standard Specification for Steel Castings, Carbon, for General Application | 2000-01-01 | 구판 |
관련상품이 존재하지 않습니다.
ASTM A790/A790M-19 - Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe 상세보기
ASTM A351/A351M-18e1 - Standard Specification for Castings, Austenitic, for Pressure-Containing Parts 상세보기
ASTM A536-84(2019)e1 - Standard Specification for Ductile Iron Castings 상세보기
ASTM A743/A743M-19 - Standard Specification for Castings, Iron-Chromium, Iron-Chromium-Nickel, Corrosion Resistant, for General Application 상세보기
ASTM A995/A995M-19 - Standard Specification for Castings, Austenitic-Ferritic (Duplex) Stainless Steel, for Pressure-Containing Parts 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
