관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
구판
판매
Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
| 분야 | 14.01 : 보건정보학 |
|---|---|
| 적용범위 | 1.1 This practice is intended to assist the various technical committees in the use of uniform methods of indicating the number of digits which are to be considered significant in specification limits, for example, specified maximum values and specified minimum values. Its aim is to outline methods which should aid in clarifying the intended meaning of specification limits with which observed values or calculated test results are compared in determining conformance with specifications. 1.2 This practice is intended to be used in determining conformance with specifications when the applicable ASTM specifications or standards make direct reference to this practice. 1.3 Reference to this practice is valid only when a choice of method has been indicated, that is, either absolute method or rounding method. 1.4 The system of units for this practice is not specified. Dimensional quantities in the practice are presented only as illustrations of calculation methods. The examples are not binding on products or test methods treated. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
| 국제분류(ICS)코드 |
17.020 : 계량 및 측정 일반
19.020 : 시험 조건 및 절차 일반 |
| 페이지수 | 5 |
| Edition | 13(2019) |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | ASTM E29-22 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications | 2022-04-01 | 표준 |
| 2 | ASTM E29-22 REDLINE | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications | 2022-04-01 | 표준 |
| 3 | ASTM E29-13(2019) | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications | 2019-01-01 | 구판 |
| 4 | ASTM E29-13 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications | 2013-08-01 | 구판 |
| 5 | ASTM E29-08 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications | 2008-10-01 | 구판 |
| 6 | ASTM E29-06b | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications | 2006-11-15 | 구판 |
| 7 | ASTM E29-06a | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications | 2006-09-15 | 구판 |
| 8 | ASTM E29-06 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications | 2006-05-01 | 구판 |
| 9 | ASTM E29-04 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications | 2004-12-01 | 구판 |
| 10 | ASTM E29-02 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications | 2002-05-10 | 구판 |
| 11 | ASTM E29-02e1 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications | 2002-05-10 | 구판 |
| 12 | ASTM E29-93a(1999) | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications | 1999-05-10 | 구판 |
| 13 | ASTM E29-93a | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications | 구판 | |
| 14 | ASTM E29-90 | Standard Practice for Using Digits in Test Data to Determine Conformance with Specifications | 구판 | |
| 15 | ASTM E29-67(1980)e1 | Standard Test Method for Indicating Which Places Of Figures Are To Be Considered Significant In Specified Limiting Values | 구판 | |
| 16 | ASTM E29-67 | Recommended Practice For Indicating Which Places Of Figures Are To Be Considered Significant In Specified Limiting Values | 구판 |
관련상품이 존재하지 않습니다.
ASTM E139-11(2018) - Standard Test Methods for Conducting Creep, Creep-Rupture, and Stress-Rupture Tests of Metallic Materials 상세보기
KS Q 5002(2019 확인) - 데이터의 통계적 기술 상세보기
ASTM E1257-16 - Standard Guide for Evaluating Grinding Materials Used for Surface Preparation in Spectrochemical Analysis 상세보기
ASTM E112-13 - Standard Test Methods for Determining Average Grain Size 상세보기
ASTM E305-13 - Standard Practice for Establishing and Controlling Atomic Emission Spectrochemical Analytical Curves 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
