관심표준 등록 : 표준업데이트 시 알림을 받을 수 있습니다.
PDF : 직접 파일 다운로드 및 인쇄 (마이페이지 확인)
PRINT : 인쇄본 우편발송, 2~3일 소요(PDF파일 미제공)
표준
판매
Standard Test Method for Water in Crude Oils by Coulometric Karl Fischer Titration
| 분야 | 05.02 : 석유제품 및 윤활유 (Ⅱ) |
|---|---|
| 적용범위 | 1.1 This test method covers the determination of water in the range from 0.02 to 5.00 mass or volume % in crude oils. Mercaptan (RSH) and sulfide (S− or H2S) as sulfur are known to interfere with this test method, but at levels of less than 500 μg/g [ppm(m)], the interference from these compounds is insignificant (see Section 6). 1.2 This test method can be used to determine water in the 0.005 to 0.02 mass % range, but the effects of the mercaptan and sulfide interference at these levels has not been determined. For the range 0.005 to 0.02 mass %, there is no precision or bias statement. 1.3 This test method is intended for use with standard commercially available coulometric Karl Fischer reagent. 1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For specific warning statements, see Section 8. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
| 국제분류(ICS)코드 | 75.040 : 원유 |
| 페이지수 | 6 |
| Edition | 12(2018) |
| No. | 표준번호 | 표준명 | 발행일 | 상태 |
|---|---|---|---|---|
| 1 | ASTM D4928-12(2018) | Standard Test Method for Water in Crude Oils by Coulometric Karl Fischer Titration | 2018-07-01 | 표준 |
| 2 | ASTM D4928-12 | Standard Test Method for Water in Crude Oils by Coulometric Karl Fischer Titration | 2012-12-01 | 구판 |
| 3 | ASTM D4928-11 | Standard Test Method for Water in Crude Oils by Coulometric Karl Fischer Titration | 2011-06-01 | 구판 |
| 4 | ASTM D4928-00(2010) | Standard Test Methods for Water in Crude Oils by Coulometric Karl Fischer Titration | 2010-06-01 | 구판 |
| 5 | ASTM D4928-00(2005) | Standard Test Methods for Water in Crude Oils by Coulometric Karl Fischer Titration | 2005-06-01 | 구판 |
| 6 | ASTM D4928-00e1 | Standard Test Methods for Water in Crude Oils by Coulometric Karl Fischer Titration | 2000-09-10 | 구판 |
| 7 | ASTM D4928-00 | Standard Test Methods for Water in Crude Oils by Coulometric Karl Fischer Titration | 2000-09-10 | 구판 |
관련상품이 존재하지 않습니다.
ASTM C471M-24 REDLINE - Standard Test Methods for Chemical Analysis of Gypsum and Gypsum Products (Metric) 상세보기
ASTM D197-19 REDLINE - Standard Test Method for Sampling and Fineness Test of Pulverized Coal 상세보기
ASTM D7546-24 - Standard Test Method for Determination of Moisture in New and In-Service Lubricating Oils and Additives by Relative Humidity Sensor 상세보기
ASTM D3180-15(2023) - Standard Practice for Calculating Coal and Coke Analyses from As-Determined to Different Bases 상세보기
ASTM D2234/D2234M-20 - Standard Practice for Collection of a Gross Sample of Coal 상세보기
IEC TS 63134:2020 - Active assisted living (AAL) use cases 상세보기
IEC 60034-5:2020 RLV - Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification 상세보기
KS B ISO TS 25740-1 - 에스컬레이터 및 무빙워크에 대한 안전요건 — 제1부: 세계공통 필수 안전요건(GESRs) 상세보기
KS B ISO TS 8100-21 - 승객 및 화물 운송용 엘리베이터 —제21부: 세계공통 필수안전요건(GESRs)을 충족하는 세계공통 안전 파라미터(GSPs) 상세보기
KS C IEC TS 62872 - 산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스 상세보기
KS표준
핸드북
